Hi Mario, On Fri, 19 Jun 2009 16:51:11 +0200 Mario Lang <[email protected]> wrote: > Does this machine have several serial ports? If so, did you try to > connect the cable to the other one as well?
No, this box has only 1 serial port. > Can you check "dmesg" output to make sure the kernel did not report any > errors during initialisation of the serial port? > > I have output like this: > [ 0.971073] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 0.971659] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A My case is: [ 1.469295] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.469450] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.470113] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.470312] serial 0000:00:1f.6: enabling device (0000 -> 0001) Regards, Hideyuki Hayashi _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
