Well, I thought I'd try to enable substitutes... [root@dobby guix]# pwd /var/guix/profiles/per-user/root/guix-profile/share/guix
guix archive --authorize berlin.guixsd.org.pub This commands has been hanging (doing nothing, as far I can tell) for 5+ minutes. That sounds non-normal. On Fri, Oct 19, 2018, at 2:11 AM, Ludovic Courtès wrote: > Hello, > > Gábor Boskovits <boskov...@gmail.com> skribis: > > > Joshua Branson <jbra...@fastmail.com> ezt írta (időpont: 2018. okt. > > 18., Cs, 16:51): > > [...] > > >> Total duration: 8 min 47 sec > >> Tests result: FAILURE > >> make: *** [Makefile:869: test] Error 2 > >> > >> Test suite failed, dumping logs. > >> Backtrace: > >> \ 4 (primitive-load "/gnu/store/nh1m265kg7ddar7jgwd7dh8f8y7���") > >> In ice-9/eval.scm: > >> 191:35 3 (_ _) > >> In srfi/srfi-1.scm: > >> 640:9 2 (for-each #<procedure b84680 at /gnu/store/f95ghy8mx00���> > >> ���) > >> In > >> /gnu/store/f95ghy8mx00fc22nrvswvnpqlfdkf2nk-module-import/guix/build/gnu-build-system.scm: > >> 799:31 1 (_ _) > >> 369:6 0 (check #:target _ #:make-flags _ #:tests? _ # _ # _ # _) > >> > >> /gnu/store/f95ghy8mx00fc22nrvswvnpqlfdkf2nk-module-import/guix/build/gnu-build-system.scm:369:6: > >> In procedure check: > >> Throw to key `srfi-34' with args `(#<condition &invoke-error [program: > >> "make" arguments: ("test" "-j" "2") exit-status: 2 term-signal: #f > >> stop-signal: #f] b8a840>)'. > >> builder for > >> `/gnu/store/qpvqn6ff2lmfq74ff3i9pz5hrb01p9hw-python2-2.7.14.drv' failed > >> with exit code 1 > >> @ build-failed > >> /gnu/store/qpvqn6ff2lmfq74ff3i9pz5hrb01p9hw-python2-2.7.14.drv - 1 builder > >> for `/gnu/store/qpvqn6ff2lmfq74ff3i9pz5hrb01p9hw-python2-2.7.14.drv' > >> failed with exit code 1 > > > > It was trying to build python2, and tests failed. > > Could you retry this to see if it is a persistent failure, or the > > tests are failing indeterministically? > > Specifically, could you try running: > > guix build /gnu/store/qpvqn6ff2lmfq74ff3i9pz5hrb01p9hw-python2-2.7.14.drv > > ? > > If you enabled substitutes (pre-built binaries) you should now be > getting substitutes for this. > > If that is the case, you can go ahead and rerun ‘guix pull’. > > (This doesn’t tell us why you were getting test failures in the first > place, but that’s a separate issue.) > > HTH, > Ludo’. > > >