Joshua Branson <jbra...@fastmail.com> writes: > Well, I thought I'd try to enable substitutes... > > [root@dobby guix]# pwd > /var/guix/profiles/per-user/root/guix-profile/share/guix > > guix archive --authorize berlin.guixsd.org.pub > > This commands has been hanging (doing nothing, as far I can tell) for 5+ > minutes. That sounds non-normal.
Ahh I forgot the "<". guix archive --authorize < berlin.guixsd.org.pub So now I am definitely using substitutes. I only have a few minutes before I need to go to work, so I don't think "guix pull" will have enough time to finish. I'll have to try again tomorrow. > > On Fri, Oct 19, 2018, at 2:11 AM, Ludovic Courtès wrote: >> Hello, >> >> Gábor Boskovits <boskov...@gmail.com> skribis: >> >> > Joshua Branson <jbra...@fastmail.com> ezt írta (időpont: 2018. okt. >> > 18., Cs, 16:51): >> >> [...] >> >> >> Total duration: 8 min 47 sec >> >> Tests result: FAILURE >> >> make: *** [Makefile:869: test] Error 2 >> >> >> >> Test suite failed, dumping logs. >> >> Backtrace: >> >> \ 4 (primitive-load "/gnu/store/nh1m265kg7ddar7jgwd7dh8f8y7���") >> >> In ice-9/eval.scm: >> >> 191:35 3 (_ _) >> >> In srfi/srfi-1.scm: >> >> 640:9 2 (for-each #<procedure b84680 at /gnu/store/f95ghy8mx00���> >> >> ���) >> >> In >> >> /gnu/store/f95ghy8mx00fc22nrvswvnpqlfdkf2nk-module-import/guix/build/gnu-build-system.scm: >> >> 799:31 1 (_ _) >> >> 369:6 0 (check #:target _ #:make-flags _ #:tests? _ # _ # _ # _) >> >> >> >> /gnu/store/f95ghy8mx00fc22nrvswvnpqlfdkf2nk-module-import/guix/build/gnu-build-system.scm:369:6: >> >> In procedure check: >> >> Throw to key `srfi-34' with args `(#<condition &invoke-error [program: >> >> "make" arguments: ("test" "-j" "2") exit-status: 2 term-signal: #f >> >> stop-signal: #f] b8a840>)'. >> >> builder for >> >> `/gnu/store/qpvqn6ff2lmfq74ff3i9pz5hrb01p9hw-python2-2.7.14.drv' failed >> >> with exit code 1 >> >> @ build-failed >> >> /gnu/store/qpvqn6ff2lmfq74ff3i9pz5hrb01p9hw-python2-2.7.14.drv - 1 >> >> builder for >> >> `/gnu/store/qpvqn6ff2lmfq74ff3i9pz5hrb01p9hw-python2-2.7.14.drv' failed >> >> with exit code 1 >> > >> > It was trying to build python2, and tests failed. >> > Could you retry this to see if it is a persistent failure, or the >> > tests are failing indeterministically? >> >> Specifically, could you try running: >> >> guix build /gnu/store/qpvqn6ff2lmfq74ff3i9pz5hrb01p9hw-python2-2.7.14.drv >> >> ? >> >> If you enabled substitutes (pre-built binaries) you should now be >> getting substitutes for this. >> >> If that is the case, you can go ahead and rerun ‘guix pull’. >> >> (This doesn’t tell us why you were getting test failures in the first >> place, but that’s a separate issue.) >> >> HTH, >> Ludo’. >> >> >>