Hello I have run into another strange problem on the Optiplex 745 in the dmesg below. It usually boots with a usb crypto key disk, but if I try to boot with a particular usb hard disk attached it will fail to find the key disk and will instead erase the disklabel on the usb hdd. The data is all OK if the disklabel is restored from file.
The external disk in question is a 3 terabyte Seagate Expansion Desk unit (see end of dmesg). I tried another external hdd but it didn't suffer the same problem, and the Seagate wasn't wiped on other crypto machines that I tried it with. Perhaps this is of interest to someone. I'm not sure if it is usb problem or what. Anyhow, I think it might about time this particular machine was "decommissioned". Thanks, Peter OpenBSD 5.6-beta (GENERIC.MP) #290: Sat Jul 19 11:29:25 MDT 2014 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 3193958400 (3045MB) avail mem = 3100217344 (2956MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0450 (77 entries) bios0: vendor Dell Inc. version "2.6.4" date 03/01/2010 bios0: Dell Inc. OptiPlex 745 acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET SSDT SSDT SSDT acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5) PCI1(S5) PCI5(S5) PCI6(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Pentium(R) D CPU 3.40GHz, 3389.45 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF cpu0: 2MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 199MHz cpu0: mwait min=64, max=64 cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Pentium(R) D CPU 3.40GHz, 3389.04 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF cpu1: 2MB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 8 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 4 (PCI4) acpiprt1 at acpi0: bus 2 (PCI2) acpiprt2 at acpi0: bus -1 (PCI3) acpiprt3 at acpi0: bus 1 (PCI1) acpiprt4 at acpi0: bus 3 (PCI5) acpiprt5 at acpi0: bus -1 (PCI6) acpiprt6 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: PSS acpicpu1 at acpi0: PSS acpibtn0 at acpi0: VBTN cpu0: Enhanced SpeedStep 3389 MHz: speeds: 3400, 2400 MHz memory map conflict 0xbf603c00/0x9fc400 pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82Q965 Host" rev 0x02 ppb0 at pci0 dev 1 function 0 "Intel 82Q965 PCIE" rev 0x02: msi pci1 at ppb0 bus 1 vga1 at pci0 dev 2 function 0 "Intel 82Q965 Video" rev 0x02 intagp0 at vga1 agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: 1024x768 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 82Q965 Video" rev 0x02 at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 8 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 8 int 17 ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 8 int 22 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: msi azalia0: codecs: Analog Devices AD1983 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: msi pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: msi pci3 at ppb2 bus 3 bge0 at pci3 dev 0 function 0 "Broadcom BCM5754" rev 0x02, BCM5754/5787 A2 (0xb002): msi, address 00:18:8b:66:ff:e6 brgphy0 at bge0 phy 1: BCM5787 10/100/1000baseT PHY, rev. 0 uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 8 int 23 uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 8 int 17 uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 8 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 8 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2 pci4 at ppb3 bus 4 pcib0 at pci0 dev 31 function 0 "Intel 82801H LPC" rev 0x02 pciide0 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 8 int 20 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <ADATA SP800> wd0: 16-sector PIO, LBA48, 30533MB, 62533296 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 atapiscsi0 at pciide0 channel 1 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <SONY, DVD-ROM DDU810A, KD38> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 8 int 20 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5 spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 spdmem2 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-5300CL5 spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-5300CL5 pciide1 at pci0 dev 31 function 5 "Intel 82801H SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide1: using apic 8 int 20 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 umass0 at uhub0 port 3 configuration 1 interface 0 " USB DISK 2.0" rev 2.00/1.00 addr 2 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd0 at scsibus2 targ 1 lun 0: <, USB DISK 2.0, PMAP> SCSI2 0/direct removable serial.13fe410029C1ABCDC706 sd0: 7640MB, 512 bytes/sector, 15646720 sectors uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/23.01 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub5 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/23.01 addr 2 uhidev1: iclass 3/1, 17 report ids ums0 at uhidev1 reportid 2: 16 buttons, Z dir wsmouse0 at ums0 mux 0 uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0 uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0 uhidev2 at uhub6 port 2 configuration 1 interface 0 "Yubico Yubico Yubikey II" rev 2.00/2.42 addr 2 uhidev2: iclass 3/1 ukbd1 at uhidev2: 8 variable keys, 6 key codes wskbd2 at ukbd1 mux 1 wskbd2: connecting to wsdisplay0 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets sd1 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed sd1: 27454MB, 512 bytes/sector, 56226972 sectors root on sd1a (72082edb903076f1.a) swap on sd1b dump on sd1b umass1 at uhub0 port 2 configuration 1 interface 0 "Seagate Expansion Desk" rev 2.10/1.00 addr 3 umass1: using SCSI over Bulk-Only scsibus5 at umass1: 2 targets, initiator 0 sd2 at scsibus5 targ 1 lun 0: <Seagate, Expansion Desk, 070B> SCSI4 0/direct fixed sd2: 2861588MB, 4096 bytes/sector, 732566645 sectors