> Date: Sun, 5 Jun 2016 19:25:30 +0200 > From: Stefan Sperling <s...@stsp.name> > > On Sun, Jun 05, 2016 at 01:26:41PM +0200, Remi Locherer wrote: > > On Sun, Jun 05, 2016 at 09:48:47AM +0200, Stefan Sperling wrote: > > > On Sat, Jun 04, 2016 at 11:16:32PM +0200, Remi Locherer wrote: > > > > On my installation the upgrade process looks like this (snapshot bsd.rd > > > > from Jun 2): > > > > > > > [...] > > > > > > > iwm0: no link ........... sleeping > > > > > > > My /etc/hostname.iwm0: > > > > > > > > nwid tsunami wpakey XXXX > > > > dhcp > > > > inet6 autoconf > > > > !pkill -9 -lf wifinwid > > > > !/etc/wifinwid \$if & > > > > > > Please add a 'debug' line at the top of your hostname.iwm0 file. > > > That might reveal more of what's going on. > > > > There is no additional output with debug in hostname.iwm0 when > > booting bsd.rd (snapshot Jun 2). When booting bsd.mp I see that iwm0 > > does scanning and receives beacons and more. > > Strange. ifconfig iwm0 debug definitely works in the ramdisk for me. > > Can we set aside the install script and hostname.if magic for a while, > and just determine whether your device works at all in bsd.rd? > > Try the following: > > Boot bsd.rd > Select the (S)hell option > cd /dev > sh MAKEDEV sd1 > mount /dev/sd1a /mnt # for firmware > ifconfig iwm0 debug > ifconfig iwm0 scan > > Repeat the scan command a few times. I expect that, at least after a few > tries, you should see the same behaviour you would see with GENERIC. > Is that not the case?
In my case, after "ifconfig iwm0 scan" it will print the iwm0: hw rev 0x210, fw ver 16.242414.0, address 11:22:33:44:55:66 line, but no further output. It doesn't see any of the access points around me. Repeating the scan a couple of times doesn't help. Only if I do: ifconfig iwm0 up ifconfig iwm0 scan it starts spewing debug messages and will it list the access points.
