On Wed, 5 Feb 2020 19:54:01 +0900 leeb <l...@shuuten.org> wrote:
> >Synopsis:    umb device no longer detected
> >Category:    kernel
> >Environment:  
>       System      : OpenBSD 6.6
>       Details     : OpenBSD 6.6-current (GENERIC.MP) #8: Tue Jan 14 20:23:40 
> JST 2020
>                        
> lee@x230.tanmatsu.local:/sys/arch/amd64/compile/GENERIC.MP
> 
>       Architecture: OpenBSD.amd64
>       Machine     : amd64
> >Description:  
>       Before reworking my umb authentication patches I upgraded
>       my -current, and found that the LTE modem was no longer
>       detected as a umb device. It seems to be picked up later
>       in the boot via umsm, but I don't think that should be 
>       happening.

That comes from https://marc.info/?l=openbsd-cvs&m=157878261716342&w=2

It's not that 'umsm picks up the device later', it's just that
umsm_match() [UMATCH_VENDOR_IFACESUBCLASS] now wins over umb_match()
[UMATCH_IFACECLASS_IFACESUBCLASS_IFACEPROTO].

Gerhard

> 
>       I happened to have an older working -current kernel saved,
>       so tried booting from that - the umb device is detected OK.
> 
>       To eliminate the possibility of a mistake on my part, I
>       swapped disks in this machine and installed a fresh current
>       snapshot. Same result. I've attached below the sendbug 
>       outputs from both the working (old) kernel, and the new
>       (not working) kernel.
> 
>       I installed the clean -current from an image at:
>       ftp.jaist.ac.jp in /OpenBSD/snapshots/amd64/install66.fs
> 
>       Ran 'sysupgrade -s' on the new install to make sure I was
>       up-to-date.
> 
> >How-To-Repeat:  
>       Install or upgrade to latest snapshot on a machine with a
>       umb device.
> 
> ****** sendbug -P output from OK kernel *********
> 
> dmesg:
> OpenBSD 6.6-current (GENERIC.MP) #8: Tue Jan 14 20:23:40 JST 2020
>     lee@x230.tanmatsu.local:/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16972566528 (16186MB)
> avail mem = 16445722624 (15683MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (68 entries)
> bios0: vendor LENOVO version "G2ET92WW (2.52 )" date 02/22/2013
> bios0: LENOVO 23061Q2
> acpi0 at bios0: ACPI 5.0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT 
> ASF! UEFI UEFI POAT SSDT SSDT UEFI DBG2 BGRT
> acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3) 
> EHC2(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.78 MHz, 06-3a-09
> cpu0: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.34 MHz, 06-3a-09
> cpu1: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.36 MHz, 06-3a-09
> cpu2: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.34 MHz, 06-3a-09
> cpu3: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xf8000000, bus 0-63
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG_)
> acpiprt2 at acpi0: bus 2 (EXP1)
> acpiprt3 at acpi0: bus 3 (EXP2)
> acpiprt4 at acpi0: bus 4 (EXP3)
> acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
> acpitz0 at acpi0: critical temperature is 103 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> acpicmos0 at acpi0
> tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e
> acpibat0 at acpi0: BAT0 model "45N1019" serial 33720 type LION oem "SANYO"
> acpiac0 at acpi0: AC unit online
> "LEN0078" at acpi0 not configured
> acpithinkpad0 at acpi0: version 1.0
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpidock0 at acpi0: GDCK not docked (0)
> acpivideo0 at acpi0: VID_
> acpivout at acpivideo0 not configured
> acpivideo1 at acpi0: VID_
> cpu0: using VERW MDS workaround (except on vmm entry)
> cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2500, 2400, 2300, 2200, 2100, 
> 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi
> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 
> addr 1
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address 
> 3c:97:0e:a5:a3:b4
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
> addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci1 at ppb0 bus 2
> sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
> sdhc0: SDHC 3.0, 50 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 3
> iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi, 
> MIMO 2T2R, MoW, address 6c:88:14:81:7b:9c
> ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 4
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
> addr 1
> pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, Lexar 256GB SSD, V1.1> 
> naa.5000000000000000
> sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 
> 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> efifb at mainbus0 not configured
> umb0 at uhub0 port 4 configuration 1 interface 12 "Sierra Wireless, 
> Incorporated MC7700" rev 2.00/0.06 addr 2
> ugen0 at uhub0 port 4 configuration 1 "Sierra Wireless, Incorporated MC7700" 
> rev 2.00/0.06 addr 2
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" 
> rev 2.00/0.00 addr 2
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" 
> rev 2.00/0.00 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> sd1: 244197MB, 512 bytes/sector, 500116577 sectors
> root on sd1a (66cc273e47e15ca3.a) swap on sd1b dump on sd1b
> inteldrm0: 1366x768, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> 
> usbdevs:
> Controller /dev/usb0:
> addr 01: 8086:0000 Intel, xHCI root hub
>        super speed, self powered, config 1, rev 1.00
>        driver: uhub0
> addr 02: 1199:68a2 Sierra Wireless, Incorporated, MC7700
>        high speed, self powered, config 1, rev 0.06, iSerial 012810001060969
>        driver: umb0
>        driver: ugen0
> Controller /dev/usb1:
> addr 01: 8086:0000 Intel, EHCI root hub
>        high speed, self powered, config 1, rev 1.00
>        driver: uhub1
> addr 02: 8087:0024 Intel, Rate Matching Hub
>        high speed, self powered, config 1, rev 0.00
>        driver: uhub3
> Controller /dev/usb2:
> addr 01: 8086:0000 Intel, EHCI root hub
>        high speed, self powered, config 1, rev 1.00
>        driver: uhub2
> addr 02: 8087:0024 Intel, Rate Matching Hub
>        high speed, self powered, config 1, rev 0.00
>        driver: uhub4
> 
> 
> ****** sendbug -P output from latest kernel *********
> 
> dmesg:
> OpenBSD 6.6-current (GENERIC.MP) #629: Mon Feb  3 17:41:16 MST 2020
>     dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16972566528 (16186MB)
> avail mem = 16445702144 (15683MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (68 entries)
> bios0: vendor LENOVO version "G2ET92WW (2.52 )" date 02/22/2013
> bios0: LENOVO 23061Q2
> acpi0 at bios0: ACPI 5.0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT 
> ASF! UEFI UEFI POAT SSDT SSDT UEFI DBG2 BGRT
> acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3) 
> EHC2(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.77 MHz, 06-3a-09
> cpu0: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.34 MHz, 06-3a-09
> cpu1: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.34 MHz, 06-3a-09
> cpu2: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.34 MHz, 06-3a-09
> cpu3: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xf8000000, bus 0-63
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG_)
> acpiprt2 at acpi0: bus 2 (EXP1)
> acpiprt3 at acpi0: bus 3 (EXP2)
> acpiprt4 at acpi0: bus 4 (EXP3)
> acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
> acpitz0 at acpi0: critical temperature is 103 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> acpicmos0 at acpi0
> tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e
> acpibat0 at acpi0: BAT0 model "45N1019" serial 33720 type LION oem "SANYO"
> acpiac0 at acpi0: AC unit online
> "LEN0078" at acpi0 not configured
> acpithinkpad0 at acpi0: version 1.0
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpidock0 at acpi0: GDCK not docked (0)
> acpivideo0 at acpi0: VID_
> acpivout at acpivideo0 not configured
> acpivideo1 at acpi0: VID_
> cpu0: using VERW MDS workaround (except on vmm entry)
> cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2500, 2400, 2300, 2200, 2100, 
> 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi
> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 
> addr 1
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address 
> 3c:97:0e:a5:a3:b4
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
> addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci1 at ppb0 bus 2
> sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
> sdhc0: SDHC 3.0, 50 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 3
> iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi, 
> MIMO 2T2R, MoW, address 6c:88:14:81:7b:9c
> ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 4
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
> addr 1
> pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, Lexar 256GB SSD, V1.1> 
> naa.5000000000000000
> sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 
> 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> efifb at mainbus0 not configured
> umsm0 at uhub0 port 4 configuration 1 interface 0 "Sierra Wireless, 
> Incorporated MC7700" rev 2.00/0.06 addr 2
> ucom0 at umsm0
> umsm1 at uhub0 port 4 configuration 1 interface 2 "Sierra Wireless, 
> Incorporated MC7700" rev 2.00/0.06 addr 2
> ucom1 at umsm1
> umsm2 at uhub0 port 4 configuration 1 interface 3 "Sierra Wireless, 
> Incorporated MC7700" rev 2.00/0.06 addr 2
> ucom2 at umsm2
> umsm3 at uhub0 port 4 configuration 1 interface 12 "Sierra Wireless, 
> Incorporated MC7700" rev 2.00/0.06 addr 2
> umsm3: missing endpoint
> umsm4 at uhub0 port 4 configuration 1 interface 13 "Sierra Wireless, 
> Incorporated MC7700" rev 2.00/0.06 addr 2
> umsm4: missing endpoint
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" 
> rev 2.00/0.00 addr 2
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" 
> rev 2.00/0.00 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> sd1: 244197MB, 512 bytes/sector, 500116577 sectors
> root on sd1a (66cc273e47e15ca3.a) swap on sd1b dump on sd1b
> inteldrm0: 1366x768, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> 
> usbdevs:
> Controller /dev/usb0:
> addr 01: 8086:0000 Intel, xHCI root hub
>        super speed, self powered, config 1, rev 1.00
>        driver: uhub0
> addr 02: 1199:68a2 Sierra Wireless, Incorporated, MC7700
>        high speed, self powered, config 1, rev 0.06, iSerial 012810001060969
>        driver: umsm0
>        driver: umsm1
>        driver: umsm2
>        driver: umsm3
> Controller /dev/usb1:
> addr 01: 8086:0000 Intel, EHCI root hub
>        high speed, self powered, config 1, rev 1.00
>        driver: uhub1
> addr 02: 8087:0024 Intel, Rate Matching Hub
>        high speed, self powered, config 1, rev 0.00
>        driver: uhub3
> Controller /dev/usb2:
> addr 01: 8086:0000 Intel, EHCI root hub
>        high speed, self powered, config 1, rev 1.00
>        driver: uhub2
> addr 02: 8087:0024 Intel, Rate Matching Hub
>        high speed, self powered, config 1, rev 0.00
>        driver: uhub4
> 

Reply via email to