Well, I have been given this particilular MC7700 which works as umsm, but it does *NOT* match as umb, probably because it's firmware is too old? Or it is in the wrong mode, I can't tell.
The alternative is that the device cannot attach at all. How does this get resolved? I can dig it up and show in a few days. Gerhard Roth <gerhard_r...@genua.de> wrote: > On Wed, 5 Feb 2020 19:54:01 +0900 leeb <l...@shuuten.org> wrote: > > >Synopsis: umb device no longer detected > > >Category: kernel > > >Environment: > > System : OpenBSD 6.6 > > Details : OpenBSD 6.6-current (GENERIC.MP) #8: Tue Jan 14 20:23:40 > > JST 2020 > > > > lee@x230.tanmatsu.local:/sys/arch/amd64/compile/GENERIC.MP > > > > Architecture: OpenBSD.amd64 > > Machine : amd64 > > >Description: > > Before reworking my umb authentication patches I upgraded > > my -current, and found that the LTE modem was no longer > > detected as a umb device. It seems to be picked up later > > in the boot via umsm, but I don't think that should be > > happening. > > That comes from https://marc.info/?l=openbsd-cvs&m=157878261716342&w=2 > > It's not that 'umsm picks up the device later', it's just that > umsm_match() [UMATCH_VENDOR_IFACESUBCLASS] now wins over umb_match() > [UMATCH_IFACECLASS_IFACESUBCLASS_IFACEPROTO]. > > Gerhard > > > > > I happened to have an older working -current kernel saved, > > so tried booting from that - the umb device is detected OK. > > > > To eliminate the possibility of a mistake on my part, I > > swapped disks in this machine and installed a fresh current > > snapshot. Same result. I've attached below the sendbug > > outputs from both the working (old) kernel, and the new > > (not working) kernel. > > > > I installed the clean -current from an image at: > > ftp.jaist.ac.jp in /OpenBSD/snapshots/amd64/install66.fs > > > > Ran 'sysupgrade -s' on the new install to make sure I was > > up-to-date. > > > > >How-To-Repeat: > > Install or upgrade to latest snapshot on a machine with a > > umb device. > > > > ****** sendbug -P output from OK kernel ********* > > > > dmesg: > > OpenBSD 6.6-current (GENERIC.MP) #8: Tue Jan 14 20:23:40 JST 2020 > > lee@x230.tanmatsu.local:/sys/arch/amd64/compile/GENERIC.MP > > real mem = 16972566528 (16186MB) > > avail mem = 16445722624 (15683MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (68 entries) > > bios0: vendor LENOVO version "G2ET92WW (2.52 )" date 02/22/2013 > > bios0: LENOVO 23061Q2 > > acpi0 at bios0: ACPI 5.0 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT > > ASF! UEFI UEFI POAT SSDT SSDT UEFI DBG2 BGRT > > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3) > > EHC2(S3) HDEF(S4) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpihpet0 at acpi0: 14318179 Hz > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.78 MHz, 06-3a-09 > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > cpu0: apic clock running at 99MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.34 MHz, 06-3a-09 > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu1: 256KB 64b/line 8-way L2 cache > > cpu1: smt 1, core 0, package 0 > > cpu2 at mainbus0: apid 2 (application processor) > > cpu2: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.36 MHz, 06-3a-09 > > cpu2: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu2: 256KB 64b/line 8-way L2 cache > > cpu2: smt 0, core 1, package 0 > > cpu3 at mainbus0: apid 3 (application processor) > > cpu3: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.34 MHz, 06-3a-09 > > cpu3: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu3: 256KB 64b/line 8-way L2 cache > > cpu3: smt 1, core 1, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > acpimcfg0 at acpi0 > > acpimcfg0: addr 0xf8000000, bus 0-63 > > acpiec0 at acpi0 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (PEG_) > > acpiprt2 at acpi0: bus 2 (EXP1) > > acpiprt3 at acpi0: bus 3 (EXP2) > > acpiprt4 at acpi0: bus 4 (EXP3) > > acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > > acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > > acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > > acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2 > > acpitz0 at acpi0: critical temperature is 103 degC > > acpibtn0 at acpi0: LID_ > > acpibtn1 at acpi0: SLPB > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > > acpicmos0 at acpi0 > > tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e > > acpibat0 at acpi0: BAT0 model "45N1019" serial 33720 type LION oem "SANYO" > > acpiac0 at acpi0: AC unit online > > "LEN0078" at acpi0 not configured > > acpithinkpad0 at acpi0: version 1.0 > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > acpidock0 at acpi0: GDCK not docked (0) > > acpivideo0 at acpi0: VID_ > > acpivout at acpivideo0 not configured > > acpivideo1 at acpi0: VID_ > > cpu0: using VERW MDS workaround (except on vmm entry) > > cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2500, 2400, 2300, 2200, 2100, > > 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > > drm0 at inteldrm0 > > inteldrm0: msi > > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi, xHCI > > 1.0 > > usb0 at xhci0: USB revision 3.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > 3.00/1.00 addr 1 > > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > > 3c:97:0e:a5:a3:b4 > > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16 > > usb1 at ehci0: USB revision 2.0 > > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi > > azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 > > audio0 at azalia0 > > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > > pci1 at ppb0 bus 2 > > sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16 > > sdhc0: SDHC 3.0, 50 MHz base clock > > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma > > ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi > > pci2 at ppb1 bus 3 > > iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: > > msi, MIMO 2T2R, MoW, address 6c:88:14:81:7b:9c > > ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi > > pci3 at ppb2 bus 4 > > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23 > > usb2 at ehci1: USB revision 2.0 > > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04 > > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI > > 1.3 > > ahci0: port 0: 6.0Gb/s > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 0 lun 0: <ATA, Lexar 256GB SSD, V1.1> > > naa.5000000000000000 > > sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin > > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 > > int 18 > > iic0 at ichiic0 > > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > > spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > wsmouse1 at pms0 mux 0 > > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > vmm0 at mainbus0: VMX/EPT > > efifb at mainbus0 not configured > > umb0 at uhub0 port 4 configuration 1 interface 12 "Sierra Wireless, > > Incorporated MC7700" rev 2.00/0.06 addr 2 > > ugen0 at uhub0 port 4 configuration 1 "Sierra Wireless, Incorporated > > MC7700" rev 2.00/0.06 addr 2 > > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > > rev 2.00/0.00 addr 2 > > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > > rev 2.00/0.00 addr 2 > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> > > sd1: 244197MB, 512 bytes/sector, 500116577 sectors > > root on sd1a (66cc273e47e15ca3.a) swap on sd1b dump on sd1b > > inteldrm0: 1366x768, 32bpp > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > > > usbdevs: > > Controller /dev/usb0: > > addr 01: 8086:0000 Intel, xHCI root hub > > super speed, self powered, config 1, rev 1.00 > > driver: uhub0 > > addr 02: 1199:68a2 Sierra Wireless, Incorporated, MC7700 > > high speed, self powered, config 1, rev 0.06, iSerial 012810001060969 > > driver: umb0 > > driver: ugen0 > > Controller /dev/usb1: > > addr 01: 8086:0000 Intel, EHCI root hub > > high speed, self powered, config 1, rev 1.00 > > driver: uhub1 > > addr 02: 8087:0024 Intel, Rate Matching Hub > > high speed, self powered, config 1, rev 0.00 > > driver: uhub3 > > Controller /dev/usb2: > > addr 01: 8086:0000 Intel, EHCI root hub > > high speed, self powered, config 1, rev 1.00 > > driver: uhub2 > > addr 02: 8087:0024 Intel, Rate Matching Hub > > high speed, self powered, config 1, rev 0.00 > > driver: uhub4 > > > > > > ****** sendbug -P output from latest kernel ********* > > > > dmesg: > > OpenBSD 6.6-current (GENERIC.MP) #629: Mon Feb 3 17:41:16 MST 2020 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 16972566528 (16186MB) > > avail mem = 16445702144 (15683MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (68 entries) > > bios0: vendor LENOVO version "G2ET92WW (2.52 )" date 02/22/2013 > > bios0: LENOVO 23061Q2 > > acpi0 at bios0: ACPI 5.0 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT > > ASF! UEFI UEFI POAT SSDT SSDT UEFI DBG2 BGRT > > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3) > > EHC2(S3) HDEF(S4) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpihpet0 at acpi0: 14318179 Hz > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.77 MHz, 06-3a-09 > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > cpu0: apic clock running at 99MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.34 MHz, 06-3a-09 > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu1: 256KB 64b/line 8-way L2 cache > > cpu1: smt 1, core 0, package 0 > > cpu2 at mainbus0: apid 2 (application processor) > > cpu2: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.34 MHz, 06-3a-09 > > cpu2: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu2: 256KB 64b/line 8-way L2 cache > > cpu2: smt 0, core 1, package 0 > > cpu3 at mainbus0: apid 3 (application processor) > > cpu3: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz, 2494.34 MHz, 06-3a-09 > > cpu3: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,F16C,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > > cpu3: 256KB 64b/line 8-way L2 cache > > cpu3: smt 1, core 1, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > acpimcfg0 at acpi0 > > acpimcfg0: addr 0xf8000000, bus 0-63 > > acpiec0 at acpi0 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (PEG_) > > acpiprt2 at acpi0: bus 2 (EXP1) > > acpiprt3 at acpi0: bus 3 (EXP2) > > acpiprt4 at acpi0: bus 4 (EXP3) > > acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > > acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > > acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > > acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS > > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2 > > acpitz0 at acpi0: critical temperature is 103 degC > > acpibtn0 at acpi0: LID_ > > acpibtn1 at acpi0: SLPB > > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > > acpicmos0 at acpi0 > > tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e > > acpibat0 at acpi0: BAT0 model "45N1019" serial 33720 type LION oem "SANYO" > > acpiac0 at acpi0: AC unit online > > "LEN0078" at acpi0 not configured > > acpithinkpad0 at acpi0: version 1.0 > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > acpidock0 at acpi0: GDCK not docked (0) > > acpivideo0 at acpi0: VID_ > > acpivout at acpivideo0 not configured > > acpivideo1 at acpi0: VID_ > > cpu0: using VERW MDS workaround (except on vmm entry) > > cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2500, 2400, 2300, 2200, 2100, > > 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > > drm0 at inteldrm0 > > inteldrm0: msi > > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi, xHCI > > 1.0 > > usb0 at xhci0: USB revision 3.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > > 3.00/1.00 addr 1 > > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > > 3c:97:0e:a5:a3:b4 > > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16 > > usb1 at ehci0: USB revision 2.0 > > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi > > azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 > > audio0 at azalia0 > > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > > pci1 at ppb0 bus 2 > > sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16 > > sdhc0: SDHC 3.0, 50 MHz base clock > > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma > > ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi > > pci2 at ppb1 bus 3 > > iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: > > msi, MIMO 2T2R, MoW, address 6c:88:14:81:7b:9c > > ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi > > pci3 at ppb2 bus 4 > > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23 > > usb2 at ehci1: USB revision 2.0 > > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04 > > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI > > 1.3 > > ahci0: port 0: 6.0Gb/s > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 0 lun 0: <ATA, Lexar 256GB SSD, V1.1> > > naa.5000000000000000 > > sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin > > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 > > int 18 > > iic0 at ichiic0 > > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > > spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > wsmouse1 at pms0 mux 0 > > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > vmm0 at mainbus0: VMX/EPT > > efifb at mainbus0 not configured > > umsm0 at uhub0 port 4 configuration 1 interface 0 "Sierra Wireless, > > Incorporated MC7700" rev 2.00/0.06 addr 2 > > ucom0 at umsm0 > > umsm1 at uhub0 port 4 configuration 1 interface 2 "Sierra Wireless, > > Incorporated MC7700" rev 2.00/0.06 addr 2 > > ucom1 at umsm1 > > umsm2 at uhub0 port 4 configuration 1 interface 3 "Sierra Wireless, > > Incorporated MC7700" rev 2.00/0.06 addr 2 > > ucom2 at umsm2 > > umsm3 at uhub0 port 4 configuration 1 interface 12 "Sierra Wireless, > > Incorporated MC7700" rev 2.00/0.06 addr 2 > > umsm3: missing endpoint > > umsm4 at uhub0 port 4 configuration 1 interface 13 "Sierra Wireless, > > Incorporated MC7700" rev 2.00/0.06 addr 2 > > umsm4: missing endpoint > > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > > rev 2.00/0.00 addr 2 > > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > > rev 2.00/0.00 addr 2 > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> > > sd1: 244197MB, 512 bytes/sector, 500116577 sectors > > root on sd1a (66cc273e47e15ca3.a) swap on sd1b dump on sd1b > > inteldrm0: 1366x768, 32bpp > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > > > usbdevs: > > Controller /dev/usb0: > > addr 01: 8086:0000 Intel, xHCI root hub > > super speed, self powered, config 1, rev 1.00 > > driver: uhub0 > > addr 02: 1199:68a2 Sierra Wireless, Incorporated, MC7700 > > high speed, self powered, config 1, rev 0.06, iSerial 012810001060969 > > driver: umsm0 > > driver: umsm1 > > driver: umsm2 > > driver: umsm3 > > Controller /dev/usb1: > > addr 01: 8086:0000 Intel, EHCI root hub > > high speed, self powered, config 1, rev 1.00 > > driver: uhub1 > > addr 02: 8087:0024 Intel, Rate Matching Hub > > high speed, self powered, config 1, rev 0.00 > > driver: uhub3 > > Controller /dev/usb2: > > addr 01: 8086:0000 Intel, EHCI root hub > > high speed, self powered, config 1, rev 1.00 > > driver: uhub2 > > addr 02: 8087:0024 Intel, Rate Matching Hub > > high speed, self powered, config 1, rev 0.00 > > driver: uhub4 > > >