I use Alpha Cleanline rosin core .032 diameter 63/37 for the tip, using a Hakko 888D with pencil tip at 750 degrees F. I use Alpha rosin core 21406 (.093 diameter) 40/60 for the shield, using a Hakko 936 with chisel tip at 800 degrees F.
73, Keith NM5G -----Original Message----- From: BVARC <bvarc-boun...@bvarc.org> On Behalf Of Rick Hiller via BVARC Sent: Thursday, July 30, 2020 6:54 PM To: BRAZOS VALLEY AMATEUR RADIO CLUB <bvarc@bvarc.org> Cc: Rick Hiller <rickhille...@gmail.com> Subject: Re: [BVARC] Best solder Non acid core for sure. HI Typically 60/40 but the Bvarc meeting with K0NEB highlighted kit building and he suggested a different mix. Have a look at the recording. > On Jul 30, 2020, at 7:12 PM, Martin Blaise via BVARC <bvarc@bvarc.org> wrote: > > Just curious what is the best solder you have used on pl259 connectors? I ran > out and can’t remember exactly what kind it was. > ________________________________________________ > Brazos Valley Amateur Radio Club > > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org ________________________________________________ Brazos Valley Amateur Radio Club BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org ________________________________________________ Brazos Valley Amateur Radio Club BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
