The table should be equipped with a dim bulb current limiter power supply. 
Plugging  in equipment that is old and has not been used in a long time can 
result in shorted power supply caps. These can result in them blowing up or 
fire emitting from them and dangerous fumes. If you plug it into a dim bulb 
supply, if the bulb glows bright, something shorted. This can save a power 
supply transformer, or a rectifier tube, which may be hard to find for an old 
radio. Always warn people, plugging in old equipment that had not been fired up 
in several years can result in expensive damage if the caps are bad, Robert 

 

From: BVARC <bvarc-boun...@bvarc.org> On Behalf Of John Chauvin via BVARC
Sent: Wednesday, March 01, 2023 8:13 PM
To: BRAZOS VALLEY AMATEUR RADIO CLUB <bvarc@bvarc.org>
Cc: John Chauvin <k5...@yahoo.com>
Subject: [BVARC] Here is a relaxing, fun, educational, highly beneficial and 
"good for you and ham radio" way to spend an hour or two at the Hamfest

 

In order to provide attendees the opportunity to see if the used equipment that 
they are about to purchase is working, BVARC provides a service at the 
Equipment Check Table to do basic tests on the equipment.  This is not a 
verification that the equipment fully performs properly, but should give the 
buyer a better feeling for the status of what he is purchasing.  We say "We 
test it to 3db above DOA" - Hi, Hi.  

 

We won't make Go-NoGo decisions for the buyer, but this testing often results 
in his feeling better or tells him that maybe he should pass.  As a staff 
member of the Check Team, you do not need to have 25 years experience working 
in an electronics test lab.  A little knowledge of basic electronics would 
help.  For example, if we are testing a transceiver, we might measure the 
output level, via an HF power meter into a dummy load on a few bands.  We would 
check the receiver to see if it hears anything.  We would test this for CW and 
apparent SSB operation.  Distortion, stability, harmonic content, sensitivity, 
etc. are far beyond what we will do.

 

To participate for an hour or two, go to the following link to sign up for the 
1 hour time slot(s) still available.  Saturday has one slot remaining; Friday 
still needs quite a few.

 

http://www.tinyurl.com/GHHF2023ECSignUp

 

We hope that you will join us.  Regardless, signed up or not, do stop by and 
see what we do.

 

Tnx es 73

de John, K5IZO

________________________________________________
Brazos Valley Amateur Radio Club

BVARC mailing list
BVARC@bvarc.org
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Publicly available archives are available here: 
https://www.mail-archive.com/bvarc@bvarc.org/ 

Reply via email to