Emma,
After the failure, can you do a "zpool list" to make sure the pool was
created properly. If that succeeds, can you give the output of "zfs list".
Do these failures only happen on sparc?
Can you run this in debug mode to get some additional data:
sparc: "boot net:dhcp install_debug=enable
x86: edit the menu entry and add "install_debug=enable" to the
kernel line
Attach the /tmp/install_log and /var/svc/log/*install* files, and
whatever shows up on the console too.
thanks,
-ethan
Emma Lee wrote:
> Hi,
>
> We have seen 3 installations with "be_init() failed with error code
> 4044". Will anyone help to resolve this issue ??
>
>
> Thanks,
> Emma
>
> guest domain installation log:
> ====================
> 100%[====================================>] 3,870,720 --.--K/s
>
> 18:59:17 (26.24 MB/s) - `/tmp/solarismisc.zlib' saved [3870720/3870720]
>
> --18:59:17--
> http://10.7.81.4:5555/export/aiserver/osol-0906-111a-ai-sparc/install.conf
>
> => `/tmp/install.conf'
> Connecting to 10.7.81.4:5555... connected.
> HTTP request sent, awaiting response... 200 OK
> Length: 68 [text/plain]
>
> 100%[====================================>] 68 --.--K/s
>
> 18:59:17 (1.46 MB/s) - `/tmp/install.conf' saved [68/68]
>
> Done mounting automated install image
> Configuring devices.
> Reading ZFS config: done.
> May 1 18:59:33 svc.startd[7]: svc:/platform/sun4u/sckmd:default:
> Method "/lib/svc/method/svc-sckmd" failed with exit status 98.
> May 1 18:59:34 svc.startd[7]: svc:/platform/sun4u/sckmd:default:
> Method "/lib/svc/method/svc-sckmd" failed with exit status 98.
> May 1 18:59:35 svc.startd[7]: svc:/platform/sun4u/sckmd:default:
> Method "/lib/svc/method/svc-sckmd" failed with exit status 98.
> May 1 18:59:35 svc.startd[7]: platform/sun4u/sckmd:default failed:
> transitioned to maintenance (see 'svcs -xv' for details)
> May 1 18:59:36 svc.startd[7]: svc:/platform/sun4u/dscp:default:
> Method "/lib/svc/method/svc-dscp start" failed with exit status 96.
> May 1 18:59:36 svc.startd[7]: platform/sun4u/dscp:default
> misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
>
> opensolaris console login: May 1 18:59:45 opensolaris mDNSResponder:
> Local Hostname opensolaris.local already in use; will try
> opensolaris-2.local instead
> May 1 18:59:46 opensolaris mDNSResponder: Local Hostname
> opensolaris-2.local already in use; will try opensolaris-3.local instead
> May 1 18:59:46 opensolaris mDNSResponder: Local Hostname
> opensolaris-3.local already in use; will try opensolaris-4.local instead
> May 1 18:59:46 opensolaris mDNSResponder: Local Hostname
> opensolaris-4.local already in use; will try opensolaris-5.local instead
> Service discovery phase initiated
> Service name to look up: osol-111a-sparc
> Service discovery finished successfully
> Process of obtaining configuration manifest initiated
> Configuration manifest obtained
> Automated Installation started
> The progress of the Automated Installation can be followed by viewing
> the logfile at /tmp/install_log
> Automated Installation failed
> Please refer to /tmp/install_log file for details
> May 1 19:00:22 opensolaris svc.startd[7]:
> application/auto-installer:default failed fatally: transitioned to
> maintenance (see 'svcs -xv' for details)
>
> opensolaris console login: root
> Password:
> May 1 19:00:42 opensolaris login: ROOT LOGIN /dev/console
> Sun Microsystems Inc. SunOS 5.11 snv_111a November 2008
> root at opensolaris:~# cat /tmp/install_log
> <AI May 2 02:00:02> /tmp/ai_combined_manifest.xml is a valid manifest
> <AI May 2 02:00:02> Auto reboot disabled
> <TDDM_E May 2 02:00:02> ddm_drive_is_cdrom(): ioctl(DKIOCREMOVABLE)
> failed
> <OM May 2 02:00:12> System reports enough physical memory for
> installation, swap is optional
> <AI May 2 02:00:12> Checking any disks for minimum recommended size
> of 12646 MB<AI May 2 02:00:12> Disk c6d0 size listed as 16384 MB
> <AI May 2 02:00:12> Default disk selected is c6d0
> <AI May 2 02:00:12> Disk name selected for installation is c6d0
> <AI May 2 02:00:12> no manifest slice information found
> <OM May 2 02:00:12> Timezone setting will be TZ=US/Pacific
> <OM May 2 02:00:12> Set timezone
> <AI May 2 02:00:12> installation will be performed from
> http://ipkg.sfbay.sun.com/dev/ (opensolaris.org)
> <AI May 2 02:00:12> installation will be performed from
> http://ipkg.sfbay.sun.com/dev/ (opensolaris.org)
> <AI May 2 02:00:12> list of packages to be installed is:
> <AI May 2 02:00:12> entire
> <AI May 2 02:00:12> SUNWcsd
> <AI May 2 02:00:12> SUNWcs
> <AI May 2 02:00:12> babel_install
> <AI May 2 02:00:12> list of packages to be removed is:
> <AI May 2 02:00:12> babel_install
> <AI May 2 02:00:12> slim_install
> <OM May 2 02:00:12> Set zfs root pool device
> <OM May 2 02:00:12> creating zpool
> *<OM May 2 02:00:15> /usr/sbin/zfs get -Hp -o value available rpool
> <OM May 2 02:00:15> Creating swap and dump on ZFS volumes
> <TIBEM_E May 2 02:00:18> be_init() failed with error code 4044
> <OM May 2 02:00:18> Could not create BE target
> <OM May 2 02:00:18> TI process failed *
> <OM May 2 02:00:18> Target instantiation failed exit_val=-1
> <AI May 2 02:00:22> om_perform_install failed with error 208
> <AI May 2 02:00:22> Auto install failed
> root at opensolaris:~#
> ------------------------------------------------------------------------
>
> _______________________________________________
> caiman-discuss mailing list
> caiman-discuss at opensolaris.org
> http://mail.opensolaris.org/mailman/listinfo/caiman-discuss
>
