Hi Ethan, Thank you for helping. I am losting network on the system now, but I will send out zpool list output once I get the network back.
Thanks, Emma On 05/04/09 12:23, Ethan Quach wrote: > Emma, > > After the failure, can you do a "zpool list" to make sure the pool was > created properly. If that succeeds, can you give the output of "zfs > list". > > Do these failures only happen on sparc? > > Can you run this in debug mode to get some additional data: > > sparc: "boot net:dhcp install_debug=enable > > x86: edit the menu entry and add "install_debug=enable" to the > kernel line > > > Attach the /tmp/install_log and /var/svc/log/*install* files, and > whatever shows up on the console too. > > > thanks, > -ethan > > > Emma Lee wrote: >> Hi, >> >> We have seen 3 installations with "be_init() failed with error code >> 4044". Will anyone help to resolve this issue ?? >> >> >> Thanks, >> Emma >> >> guest domain installation log: >> ==================== >> 100%[====================================>] 3,870,720 --.--K/s >> >> 18:59:17 (26.24 MB/s) - `/tmp/solarismisc.zlib' saved [3870720/3870720] >> >> --18:59:17-- >> http://10.7.81.4:5555/export/aiserver/osol-0906-111a-ai-sparc/install.conf >> >> => `/tmp/install.conf' >> Connecting to 10.7.81.4:5555... connected. >> HTTP request sent, awaiting response... 200 OK >> Length: 68 [text/plain] >> >> 100%[====================================>] 68 --.--K/s >> >> 18:59:17 (1.46 MB/s) - `/tmp/install.conf' saved [68/68] >> >> Done mounting automated install image >> Configuring devices. >> Reading ZFS config: done. >> May 1 18:59:33 svc.startd[7]: svc:/platform/sun4u/sckmd:default: >> Method "/lib/svc/method/svc-sckmd" failed with exit status 98. >> May 1 18:59:34 svc.startd[7]: svc:/platform/sun4u/sckmd:default: >> Method "/lib/svc/method/svc-sckmd" failed with exit status 98. >> May 1 18:59:35 svc.startd[7]: svc:/platform/sun4u/sckmd:default: >> Method "/lib/svc/method/svc-sckmd" failed with exit status 98. >> May 1 18:59:35 svc.startd[7]: platform/sun4u/sckmd:default failed: >> transitioned to maintenance (see 'svcs -xv' for details) >> May 1 18:59:36 svc.startd[7]: svc:/platform/sun4u/dscp:default: >> Method "/lib/svc/method/svc-dscp start" failed with exit status 96. >> May 1 18:59:36 svc.startd[7]: platform/sun4u/dscp:default >> misconfigured: transitioned to maintenance (see 'svcs -xv' for details) >> >> opensolaris console login: May 1 18:59:45 opensolaris mDNSResponder: >> Local Hostname opensolaris.local already in use; will try >> opensolaris-2.local instead >> May 1 18:59:46 opensolaris mDNSResponder: Local Hostname >> opensolaris-2.local already in use; will try opensolaris-3.local instead >> May 1 18:59:46 opensolaris mDNSResponder: Local Hostname >> opensolaris-3.local already in use; will try opensolaris-4.local instead >> May 1 18:59:46 opensolaris mDNSResponder: Local Hostname >> opensolaris-4.local already in use; will try opensolaris-5.local instead >> Service discovery phase initiated >> Service name to look up: osol-111a-sparc >> Service discovery finished successfully >> Process of obtaining configuration manifest initiated >> Configuration manifest obtained >> Automated Installation started >> The progress of the Automated Installation can be followed by >> viewing the logfile at /tmp/install_log >> Automated Installation failed >> Please refer to /tmp/install_log file for details >> May 1 19:00:22 opensolaris svc.startd[7]: >> application/auto-installer:default failed fatally: transitioned to >> maintenance (see 'svcs -xv' for details) >> >> opensolaris console login: root >> Password: >> May 1 19:00:42 opensolaris login: ROOT LOGIN /dev/console >> Sun Microsystems Inc. SunOS 5.11 snv_111a November 2008 >> root at opensolaris:~# cat /tmp/install_log >> <AI May 2 02:00:02> /tmp/ai_combined_manifest.xml is a valid manifest >> <AI May 2 02:00:02> Auto reboot disabled >> <TDDM_E May 2 02:00:02> ddm_drive_is_cdrom(): ioctl(DKIOCREMOVABLE) >> failed >> <OM May 2 02:00:12> System reports enough physical memory for >> installation, swap is optional >> <AI May 2 02:00:12> Checking any disks for minimum recommended size >> of 12646 MB<AI May 2 02:00:12> Disk c6d0 size listed as 16384 MB >> <AI May 2 02:00:12> Default disk selected is c6d0 >> <AI May 2 02:00:12> Disk name selected for installation is c6d0 >> <AI May 2 02:00:12> no manifest slice information found >> <OM May 2 02:00:12> Timezone setting will be TZ=US/Pacific >> <OM May 2 02:00:12> Set timezone >> <AI May 2 02:00:12> installation will be performed from >> http://ipkg.sfbay.sun.com/dev/ (opensolaris.org) >> <AI May 2 02:00:12> installation will be performed from >> http://ipkg.sfbay.sun.com/dev/ (opensolaris.org) >> <AI May 2 02:00:12> list of packages to be installed is: >> <AI May 2 02:00:12> entire >> <AI May 2 02:00:12> SUNWcsd >> <AI May 2 02:00:12> SUNWcs >> <AI May 2 02:00:12> babel_install >> <AI May 2 02:00:12> list of packages to be removed is: >> <AI May 2 02:00:12> babel_install >> <AI May 2 02:00:12> slim_install >> <OM May 2 02:00:12> Set zfs root pool device >> <OM May 2 02:00:12> creating zpool >> *<OM May 2 02:00:15> /usr/sbin/zfs get -Hp -o value available rpool >> <OM May 2 02:00:15> Creating swap and dump on ZFS volumes >> <TIBEM_E May 2 02:00:18> be_init() failed with error code 4044 >> <OM May 2 02:00:18> Could not create BE target >> <OM May 2 02:00:18> TI process failed * >> <OM May 2 02:00:18> Target instantiation failed exit_val=-1 >> <AI May 2 02:00:22> om_perform_install failed with error 208 >> <AI May 2 02:00:22> Auto install failed >> root at opensolaris:~# >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> caiman-discuss mailing list >> caiman-discuss at opensolaris.org >> http://mail.opensolaris.org/mailman/listinfo/caiman-discuss >>
