> Could you post the output of calling “tc -s qdisc” here on the list please? That should allow to figure out what you actually told cake to do ;0
> /home/ubnt$ sudo tc -s qdisc > qdisc pfifo_fast 0: dev switch0 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 > 0 0 1 1 1 1 1 1 1 1 > Sent 133387235 bytes 191612 pkt (dropped 0, overlimits 0 requeues 0) > backlog 0b 0p requeues 0 > qdisc pfifo_fast 0: dev imq0 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 > 0 1 1 1 1 1 1 1 1 > Sent 288 bytes 9 pkt (dropped 0, overlimits 0 requeues 0) > backlog 0b 0p requeues 0 > qdisc cake 8001: dev eth0 root refcnt 2 bandwidth 900Kbit diffserv3 > dual-srchost nat rtt 100.0ms raw > Sent 183589 bytes 1316 pkt (dropped 6, overlimits 627 requeues 0) > backlog 0b 0p requeues 0 > memory used: 91392b of 4Mb > capacity estimate: 900Kbit > Bulk Best Effort Voice > thresh 56248bit 900Kbit 225Kbit > target 323.0ms 20.2ms 80.7ms > interval 646.0ms 115.2ms 161.5ms > pk_delay 0us 7.8ms 4us > av_delay 0us 695us 0us > sp_delay 0us 5us 0us > pkts 0 1314 8 > bytes 0 188234 336 > way_inds 0 0 0 > way_miss 0 98 1 > way_cols 0 0 0 > drops 0 6 0 > marks 0 0 0 > sp_flows 0 1 0 > bk_flows 0 1 0 > un_flows 0 0 0 > max_len 0 1514 42 > qdisc ingress ffff: dev eth0 parent ffff:fff1 ---------------- > Sent 1396868 bytes 1615 pkt (dropped 0, overlimits 0 requeues 0) > backlog 0b 0p requeues 0 > qdisc pfifo_fast 0: dev eth1 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 > 0 1 1 1 1 1 1 1 1 > Sent 822 bytes 13 pkt (dropped 0, overlimits 0 requeues 0) > backlog 0b 0p requeues 0 > qdisc pfifo_fast 0: dev eth2 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 > 0 1 1 1 1 1 1 1 1 > Sent 822 bytes 13 pkt (dropped 0, overlimits 0 requeues 0) > backlog 0b 0p requeues 0 > qdisc pfifo_fast 0: dev eth3 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 > 0 1 1 1 1 1 1 1 1 > Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) > backlog 0b 0p requeues 0 > qdisc pfifo_fast 0: dev eth4 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 > 0 1 1 1 1 1 1 1 1 > Sent 822 bytes 13 pkt (dropped 0, overlimits 0 requeues 0) > backlog 0b 0p requeues 0 > qdisc pfifo_fast 0: dev pppoe0 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 > 0 0 1 1 1 1 1 1 1 1 > Sent 23509667 bytes 164606 pkt (dropped 0, overlimits 0 requeues 0) > backlog 0b 0p requeues 0 > qdisc cake 8002: dev ifb4eth0 root refcnt 2 bandwidth 16Mbit diffserv3 > dual-dsthost nat ingress rtt 100.0ms raw > Sent 1394936 bytes 1483 pkt (dropped 2, overlimits 1380 requeues 0) > backlog 0b 0p requeues 0 > memory used: 47872b of 4Mb > capacity estimate: 16Mbit > Bulk Best Effort Voice > thresh 1Mbit 16Mbit 4Mbit > target 18.2ms 5.0ms 5.0ms > interval 113.2ms 100.0ms 10.0ms > pk_delay 0us 979us 8us > av_delay 0us 277us 0us > sp_delay 0us 4us 0us > pkts 0 1479 6 > bytes 0 1396354 360 > way_inds 0 0 0 > way_miss 0 76 1 > way_cols 0 0 0 > drops 0 2 0 > marks 0 0 0 > sp_flows 0 2 0 > bk_flows 0 1 0 > un_flows 0 0 0 > max_len 0 1514 60 Sorry, the formatting isn't that great :\ And yeah I know my upload isn't that great either On 20 April 2017 at 15:43, Sebastian Moeller <moell...@gmx.de> wrote: > Hi, > > > On Apr 20, 2017, at 15:39, Dendari Marini <dendar...@gmail.com> wrote: > > > > Hello, > > > > Not sure if this is the right place, just recently discovered about the > bufferbloat issue, so I'm still learning new things every day. > > > > I bought an Ubiquiti EdgeRouter X just for this and for the most part > the built-in Smart Queue (which uses fq_codel + HTB) works wonderfully but > there are some applications which still give me issues. > > > > In particular I'm currently trying to resolve these issues with Steam, > which doesn't seem to be affected much by the Smart Queue. Someone > suggested to use Cake Cobalt, which I'm currently using, but I can't seem > to get any better result. > > > > From my understanding I should at least get fairer per-host bandwidth, > but when one PC is downloading with Steam the other will only receive ~15% > of the total bandwidth. > > Could you post the output of calling “tc -s qdisc” here on the > list please? That should allow to figure out what you actually told cake to > do ;0 > > > > > > My connection isn't really fast (just 16/0.9 Mbitps ADSL) > > That uplink is going to be painful no matter what. > > Best Regards > > > and I have only two PCs connected via ethernet to the EdgeRouter X plus > a WiFi access point which is mainly used by smartphones. I haven't done any > particular change to the ER-X so for the most is kinda stock. > > > > Any advice? > > _______________________________________________ > > Cake mailing list > > Cake@lists.bufferbloat.net > > https://lists.bufferbloat.net/listinfo/cake > >
_______________________________________________ Cake mailing list Cake@lists.bufferbloat.net https://lists.bufferbloat.net/listinfo/cake