> On 20 Apr, 2017, at 18:23, Dendari Marini <dendar...@gmail.com> wrote: > > > Could you post the output of calling “tc -s qdisc” here on the list please? > > That should allow to figure out what you actually told cake to do ;0
> qdisc cake 8001: dev eth0 root refcnt 2 bandwidth 900Kbit diffserv3 > dual-srchost nat rtt 100.0ms raw > qdisc cake 8002: dev ifb4eth0 root refcnt 2 bandwidth 16Mbit diffserv3 > dual-dsthost nat ingress rtt 100.0ms raw Looks like most of your options are okay, including the correct “dual” modes and “ingress” mode in the right place. However, I think you need to adjust your bandwidth and overhead settings, otherwise Cake isn’t reliably in control of the bottleneck queues. Try these to begin with: … bandwidth 850Kbit conservative dual-srchost nat … bandwidth 15Mbit conservative dual-dsthost nat ingress That should give you correct operation, and you can fine-tune from there. - Jonathan Morton _______________________________________________ Cake mailing list Cake@lists.bufferbloat.net https://lists.bufferbloat.net/listinfo/cake
