thomas schorpp wrote: > thomas schorpp wrote: >> thomas schorpp wrote: >>> thomas schorpp wrote: >>>> callweaver: page allocation failure. order:0, mode:0x20 >>>> Pid: 4676, comm: callweaver Tainted: P 2.6.24-1-686 #1 >>>> [<c015f436>] __alloc_pages+0x2c4/0x2d5 >>>> [<c01757ad>] cache_alloc_refill+0x27c/0x477 >>>> [<c0175a1d>] __kmalloc+0x75/0xb2 >>>> [<c0259e2b>] __alloc_skb+0x49/0xf7 >>>> [<ccb016c1>] setup_rx_descbuffer+0x28/0xd7 [b43] >>>> [<c01099ca>] sched_clock+0x8/0x18 >>>> [<ccb022dc>] b43_dma_rx+0x140/0x1ef [b43] >>>> [<c0109909>] pit_next_event+0x2e/0x33 >>>> [<ccaf4e37>] b43_interrupt_tasklet+0x42a/0x57d [b43] >>>> [<c013cd70>] tick_program_event+0x33/0x52 >>>> [<c013849e>] hrtimer_interrupt+0x198/0x1c2 >>>> [<c01293e3>] tasklet_action+0x58/0xb8 >>>> [<c0128f7b>] __do_softirq+0x66/0xd3 >>>> [<c012902d>] do_softirq+0x45/0x53 >>>> [<c0129291>] irq_exit+0x38/0x6b >>>> [<c01066f2>] do_IRQ+0x5a/0x70 >>>> [<c0128b07>] sys_gettimeofday+0x27/0x53 >>>> [<c01048c3>] common_interrupt+0x23/0x28 >>>> [<c02b0000>] unix_mkname+0x4d/0x6f >>>> ======================= >>>> Mem-info: >>>> DMA per-cpu: >>>> CPU 0: Hot: hi: 0, btch: 1 usd: 0 Cold: hi: 0, >>>> btch: 1 usd: 0 >>>> Normal per-cpu: >>>> CPU 0: Hot: hi: 42, btch: 7 usd: 35 Cold: hi: 14, >>>> btch: 3 usd: 12 >>>> Active:19989 inactive:16981 dirty:105 writeback:0 unstable:0 >>>> free:337 slab:8648 mapped:5486 pagetables:225 bounce:0 >>>> DMA free:744kB min:144kB low:180kB high:216kB active:1436kB >>>> inactive:6688kB present:16256kB pages_scanned:0 all_unreclaimable? no >>>> lowmem_reserve[]: 0 174 174 174 >>>> Normal free:604kB min:1616kB low:2020kB high:2424kB active:78520kB >>>> inactive:61236kB present:178692kB pages_scanned:0 all_unreclaimable? no >>>> lowmem_reserve[]: 0 0 0 0 >>>> DMA: 0*4kB 1*8kB 0*16kB 1*32kB 1*64kB 1*128kB 0*256kB 1*512kB >>>> 0*1024kB 0*2048kB 0*4096kB = 744kB >>>> Normal: 6*4kB 1*8kB 1*16kB 1*32kB 0*64kB 0*128kB 0*256kB 1*512kB >>>> 0*1024kB 0*2048kB 0*4096kB = 592kB >>>> Swap cache: add 0, delete 0, find 0/0, race 0+0 >>>> Free swap = 249944kB >>>> Total swap = 249944kB >>>> Free swap: 249944kB >>>> 49120 pages of RAM >>>> 0 pages of HIGHMEM >>>> 1266 reserved pages >>>> 18042 pages shared >>>> 0 pages swap cached build on external debian lenny/sid PIII >>>> 1GHz host for >= PII 266 etch target host >>>> >>>> changes made since last OK state: >>>> >>>> 1. CW svn up >>>> 2. upgraded to spandsp .18 >>>> 3. dist upgrade on the build host: >>>> >> >>>> >>>> suspect gcc binary incompatibility. >>>> now trying to reproduce with target machine devenv build... >>>> >>>> y >>>> tom >>>> >>> >>> >>> XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX >>> >>> >>> no platform/gcc issue. reproducible with target host compiled build, >>> too. >>> this comes from the upgrade to spandsp .18 and the last few 1.2 RC >>> svn changes, can You guys tell me what You're doing to disrupt 2.6.24 >>> networking? >>> forwarding to kernel bugzilla: >>> >> >> notourbug. b43 stalls system if wireless connection problems, old >> bcm4306 card dies here: >> >> b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. >> but it is there and fs is ok. >> >> wlan0: disassociate(reason=3) >> wlan0: Initial auth_alg=0 >> wlan0: authenticate with AP 00:16:38:cb:60:61 >> wlan0: Initial auth_alg=0 >> wlan0: authenticate with AP 00:16:38:cb:60:61 >> wlan0: Initial auth_alg=0 >> wlan0: authenticate with AP 00:16:38:cb:60:61 >> wlan0: RX authentication from 00:16:38:cb:60:61 (alg=0 transaction=2 >> status=0) >> wlan0: authenticated >> wlan0: associate with AP 00:16:38:cb:60:61 >> wlan0: authentication frame received from 00:16:38:cb:60:61, but not >> in authenticate state - ignored >> wlan0: authentication frame received from 00:16:38:cb:60:61, but not >> in authenticate state - ignored >> wlan0: RX ReassocResp from 00:16:38:cb:60:61 (capab=0x11 status=0 aid=1) >> wlan0: associated >> wlan0: disassociate(reason=3) >> wlan0: Initial auth_alg=0 >> wlan0: authenticate with AP 00:16:38:cb:60:61 >> wlan0: RX authentication from 00:16:38:cb:60:61 (alg=0 transaction=2 >> status=0) >> wlan0: authenticated >> wlan0: associate with AP 00:16:38:cb:60:61 >> wlan0: RX ReassocResp from 00:16:38:cb:60:61 (capab=0x11 status=0 aid=1) >> wlan0: associated >> wlan0: deauthenticate(reason=3) >> >> > > bug reopened, bcm4306 card ok again after cold boot, device not > involved, callweaver still stalls system on starttup even if wlan0 not > there/forced down, now filing kernel bugzilla. > > tom3:~# ping sip.tc300.net > PING sip.tc300.net (192.168.100.1) 56(84) bytes of data. > 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=1 ttl=64 time=1.87 ms > 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=2 ttl=64 time=6.36 ms > 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=3 ttl=64 time=1.31 ms > 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=4 ttl=64 time=8.02 ms > 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=5 ttl=64 time=1.24 ms > 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=6 ttl=64 time=9.20 ms > 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=7 ttl=64 time=1.20 ms > 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=8 ttl=64 time=7.13 ms > > --- sip.tc300.net ping statistics --- > 8 packets transmitted, 8 received, 0% packet loss, time 7002ms > rtt min/avg/max/mdev = 1.207/4.545/9.202/3.227 ms > > Registered led device: b43-phy0:tx > Registered led device: b43-phy0:rx > Registered led device: b43-phy0:radio > wlan0: Initial auth_alg=0 > wlan0: authenticate with AP 00:16:38:cb:60:61 > wlan0: RX authentication from 00:16:38:cb:60:61 (alg=0 transaction=2 > status=0) > wlan0: authenticated > wlan0: associate with AP 00:16:38:cb:60:61 > wlan0: RX AssocResp from 00:16:38:cb:60:61 (capab=0x11 status=0 aid=1) > wlan0: associated > > >
up again, something in the last changes makes CW 1.2RC rev. 4593 stalling the system when used with the provided debian init script with safe_callweaver or callweaver, start with su -- -c safe_callweaver callweaver or same in /etc/rc.local works: root 4505 1 0 10:25 ? 00:00:00 /bin/sh /usr/sbin/safe_callweaver 129 4509 4505 75 10:25 ? 00:00:45 /usr/sbin/callweaver -vvvg -f tom3:~# callweaver -r CallWeaver svn-1.2 SVN-4593 http://www.callweaver.org - The True Open Source PBX ========================================================================= Connected to CallWeaver CallWeaver svn-1.2 SVN-4593 currently running on tom3 (pid = 4509) Verbosity is at least 3 -- Remote UNIX connection tom3*CLI> according to aptitude log theres nothing changed on the target box, and ive changed nothing other. just updating regularly on the compile host by building packages and scp'ing them to the CW box. filed as http://www.callweaver.org/ticket/347 cause other distros startup scripts maybe affected, too. _______________________________________________ Callweaver-dev mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-dev
