thomas schorpp wrote: > thomas schorpp wrote: >> thomas schorpp wrote: >>> thomas schorpp wrote: >>>> thomas schorpp wrote: >>>>> callweaver: page allocation failure. order:0, mode:0x20 >>>>> Pid: 4676, comm: callweaver Tainted: P 2.6.24-1-686 #1 >>>>> [<c015f436>] __alloc_pages+0x2c4/0x2d5 >>>>> [<c01757ad>] cache_alloc_refill+0x27c/0x477 >>>>> [<c0175a1d>] __kmalloc+0x75/0xb2 >>>>> [<c0259e2b>] __alloc_skb+0x49/0xf7 >>>>> [<ccb016c1>] setup_rx_descbuffer+0x28/0xd7 [b43] >>>>> [<c01099ca>] sched_clock+0x8/0x18 >>>>> [<ccb022dc>] b43_dma_rx+0x140/0x1ef [b43] >>>>> [<c0109909>] pit_next_event+0x2e/0x33 >>>>> [<ccaf4e37>] b43_interrupt_tasklet+0x42a/0x57d [b43] >>>>> [<c013cd70>] tick_program_event+0x33/0x52 >>>>> [<c013849e>] hrtimer_interrupt+0x198/0x1c2 >>>>> [<c01293e3>] tasklet_action+0x58/0xb8 >>>>> [<c0128f7b>] __do_softirq+0x66/0xd3 >>>>> [<c012902d>] do_softirq+0x45/0x53 >>>>> [<c0129291>] irq_exit+0x38/0x6b >>>>> [<c01066f2>] do_IRQ+0x5a/0x70 >>>>> [<c0128b07>] sys_gettimeofday+0x27/0x53 >>>>> [<c01048c3>] common_interrupt+0x23/0x28 >>>>> [<c02b0000>] unix_mkname+0x4d/0x6f >>>>> ======================= >>>>> Mem-info: >>>>> DMA per-cpu: >>>>> CPU 0: Hot: hi: 0, btch: 1 usd: 0 Cold: hi: 0, >>>>> btch: 1 usd: 0 >>>>> Normal per-cpu: >>>>> CPU 0: Hot: hi: 42, btch: 7 usd: 35 Cold: hi: 14, >>>>> btch: 3 usd: 12 >>>>> Active:19989 inactive:16981 dirty:105 writeback:0 unstable:0 >>>>> free:337 slab:8648 mapped:5486 pagetables:225 bounce:0 >>>>> DMA free:744kB min:144kB low:180kB high:216kB active:1436kB >>>>> inactive:6688kB present:16256kB pages_scanned:0 all_unreclaimable? no >>>>> lowmem_reserve[]: 0 174 174 174 >>>>> Normal free:604kB min:1616kB low:2020kB high:2424kB active:78520kB >>>>> inactive:61236kB present:178692kB pages_scanned:0 >>>>> all_unreclaimable? no >>>>> lowmem_reserve[]: 0 0 0 0 >>>>> DMA: 0*4kB 1*8kB 0*16kB 1*32kB 1*64kB 1*128kB 0*256kB 1*512kB >>>>> 0*1024kB 0*2048kB 0*4096kB = 744kB >>>>> Normal: 6*4kB 1*8kB 1*16kB 1*32kB 0*64kB 0*128kB 0*256kB 1*512kB >>>>> 0*1024kB 0*2048kB 0*4096kB = 592kB >>>>> Swap cache: add 0, delete 0, find 0/0, race 0+0 >>>>> Free swap = 249944kB >>>>> Total swap = 249944kB >>>>> Free swap: 249944kB >>>>> 49120 pages of RAM >>>>> 0 pages of HIGHMEM >>>>> 1266 reserved pages >>>>> 18042 pages shared >>>>> 0 pages swap cached build on external debian lenny/sid PIII >>>>> 1GHz host for >= PII 266 etch target host >>>>> >>>>> changes made since last OK state: >>>>> >>>>> 1. CW svn up >>>>> 2. upgraded to spandsp .18 >>>>> 3. dist upgrade on the build host: >>>>> >>> >>>>> >>>>> suspect gcc binary incompatibility. >>>>> now trying to reproduce with target machine devenv build... >>>>> >>>>> y >>>>> tom >>>>> >>>> >>>> >>>> XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX >>>> >>>> >>>> no platform/gcc issue. reproducible with target host compiled build, >>>> too. >>>> this comes from the upgrade to spandsp .18 and the last few 1.2 RC >>>> svn changes, can You guys tell me what You're doing to disrupt >>>> 2.6.24 networking? >>>> forwarding to kernel bugzilla: >>>> >>> >>> notourbug. b43 stalls system if wireless connection problems, old >>> bcm4306 card dies here: >>> >>> b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. >>> but it is there and fs is ok. >>> >>> wlan0: disassociate(reason=3) >>> wlan0: Initial auth_alg=0 >>> wlan0: authenticate with AP 00:16:38:cb:60:61 >>> wlan0: Initial auth_alg=0 >>> wlan0: authenticate with AP 00:16:38:cb:60:61 >>> wlan0: Initial auth_alg=0 >>> wlan0: authenticate with AP 00:16:38:cb:60:61 >>> wlan0: RX authentication from 00:16:38:cb:60:61 (alg=0 transaction=2 >>> status=0) >>> wlan0: authenticated >>> wlan0: associate with AP 00:16:38:cb:60:61 >>> wlan0: authentication frame received from 00:16:38:cb:60:61, but not >>> in authenticate state - ignored >>> wlan0: authentication frame received from 00:16:38:cb:60:61, but not >>> in authenticate state - ignored >>> wlan0: RX ReassocResp from 00:16:38:cb:60:61 (capab=0x11 status=0 aid=1) >>> wlan0: associated >>> wlan0: disassociate(reason=3) >>> wlan0: Initial auth_alg=0 >>> wlan0: authenticate with AP 00:16:38:cb:60:61 >>> wlan0: RX authentication from 00:16:38:cb:60:61 (alg=0 transaction=2 >>> status=0) >>> wlan0: authenticated >>> wlan0: associate with AP 00:16:38:cb:60:61 >>> wlan0: RX ReassocResp from 00:16:38:cb:60:61 (capab=0x11 status=0 aid=1) >>> wlan0: associated >>> wlan0: deauthenticate(reason=3) >>> >>> >> >> bug reopened, bcm4306 card ok again after cold boot, device not >> involved, callweaver still stalls system on starttup even if wlan0 not >> there/forced down, now filing kernel bugzilla. >> >> tom3:~# ping sip.tc300.net >> PING sip.tc300.net (192.168.100.1) 56(84) bytes of data. >> 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=1 ttl=64 >> time=1.87 ms >> 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=2 ttl=64 >> time=6.36 ms >> 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=3 ttl=64 >> time=1.31 ms >> 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=4 ttl=64 >> time=8.02 ms >> 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=5 ttl=64 >> time=1.24 ms >> 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=6 ttl=64 >> time=9.20 ms >> 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=7 ttl=64 >> time=1.20 ms >> 64 bytes from sip.tc300.net (192.168.100.1): icmp_seq=8 ttl=64 >> time=7.13 ms >> >> --- sip.tc300.net ping statistics --- >> 8 packets transmitted, 8 received, 0% packet loss, time 7002ms >> rtt min/avg/max/mdev = 1.207/4.545/9.202/3.227 ms >> >> Registered led device: b43-phy0:tx >> Registered led device: b43-phy0:rx >> Registered led device: b43-phy0:radio >> wlan0: Initial auth_alg=0 >> wlan0: authenticate with AP 00:16:38:cb:60:61 >> wlan0: RX authentication from 00:16:38:cb:60:61 (alg=0 transaction=2 >> status=0) >> wlan0: authenticated >> wlan0: associate with AP 00:16:38:cb:60:61 >> wlan0: RX AssocResp from 00:16:38:cb:60:61 (capab=0x11 status=0 aid=1) >> wlan0: associated >> >> >> > > up again, something in the last changes makes CW 1.2RC rev. 4593 > stalling the system when used with the provided debian init script with > safe_callweaver or callweaver, start with su -- -c safe_callweaver > callweaver or same in /etc/rc.local works: > > root 4505 1 0 10:25 ? 00:00:00 /bin/sh > /usr/sbin/safe_callweaver > 129 4509 4505 75 10:25 ? 00:00:45 /usr/sbin/callweaver > -vvvg -f > > tom3:~# callweaver -r > CallWeaver svn-1.2 SVN-4593 http://www.callweaver.org - The True Open > Source PBX > ========================================================================= > Connected to CallWeaver CallWeaver svn-1.2 SVN-4593 currently running on > tom3 (pid = 4509) > Verbosity is at least 3 > -- Remote UNIX connection > tom3*CLI> > > according to aptitude log theres nothing changed on the target box, and > ive changed nothing other. > just updating regularly on the compile host by building packages and > scp'ing them to the CW box. > > filed as http://www.callweaver.org/ticket/347 cause other distros > startup scripts maybe affected, too. > > >
the -p Run as pseudo-realtime thread is the system staller here. _______________________________________________ Callweaver-dev mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-dev
