I have installed using rpm callweaver-1.2-0.3.rc4.20070822.rpm, now I will try
to install from the latest source.
my dial plan is like that (I had to enter the parameters with slash, comma
gives error in that release):
exten => 9875,1,Answer
exten => 9875,2,NConference(12345/MV)
exten => 9875,3,Hangup
exten => 9876,1,Answer
exten => 9876,2,NConference(12345/SV)
exten => 9876,3,Hangup
if the moderator dials 9875 and adds the other parties using *1 command,
everything works fine.
if the users dial 9876 and enter the conference themselves, they can only
hear voice prompts, but can not hear each other.
-----------------------------------------------------------------------------------------------------
VoIP Termination wrote:
> Hi,
>
> I'm quite new to CallWeaver. I tried to test NConference but faced with the
> following problem:
>
> If the conference is created using moderator commands (adding 2 other
> parties to the conference using *1 command + extension) everything works
> fine. On the other hand, if the parties dial the conference extension and
> enter the conference on their own they can hear only conference voice
> prompts, but not each other.
>
> Is this a bug or is it the way NConference application works? I would like
> 2 or more parties to dial an extension and enter the conference but it seems
> that is not possible.
>
It is possible.
Please let me know which revision and version of CW you are using and
the relevant dialplan.
Max
---------------------------------
Be a better Globetrotter. Get better travel answers from someone who knows.
Yahoo! Answers - Check it out._______________________________________________
Callweaver-users mailing list
[email protected]
http://lists.callweaver.org/mailman/listinfo/callweaver-users
