Hello.
When I execute a Dial with a ZAP channel always get the following message
Executing Dial("SIP/foo-fc39", ZAP/64,20,r)
Jan 31 20:01:29 WARNING[3054701488]: chan_zap.c:1917 zt_call: Zap/64-1:
Unable to start on hook transfer: Inappropriate ioctl for device
-- Called 64
-- Zap/64-1 is ringing
###############
#ztcfg -vvvv
Zaptel Version: 1.4.8
Echo Canceller: MG2
Configuration
======================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 63: FXO Loopstart (Default) (Slaves: 63)
Channel 64: FXO Loopstart (Default) (Slaves: 64)
Channel 65: FXO Loopstart (Default) (Slaves: 65)
[ ... ]
Channel 108: FXO Loopstart (Default) (Slaves: 108)
Channel 109: FXO Loopstart (Default) (Slaves: 109)
Channel 110: FXO Loopstart (Default) (Slaves: 110)
48 channels to configure.
################
#ls -l /dev/zap/
total 0
crw-rw---- 1 callweaver callweaver 196, 1 2008-01-31 18:16 1
crw-rw---- 1 callweaver callweaver 196, 10 2008-01-31 18:16 10
crw-rw---- 1 callweaver callweaver 196, 100 2008-01-31 18:16 100
[ ... ]
crw-rw---- 1 callweaver callweaver 196, 97 2008-01-31 18:16 97
crw-rw---- 1 callweaver callweaver 196, 98 2008-01-31 18:16 98
crw-rw---- 1 callweaver callweaver 196, 99 2008-01-31 18:16 99
crw-rw---- 1 callweaver callweaver 196, 254 2008-01-31 18:16 channel
crw-rw---- 1 callweaver callweaver 196, 0 2008-01-31 18:16 ctl
crw-rw---- 1 callweaver callweaver 196, 255 2008-01-31 18:16 pseudo
crw-rw---- 1 callweaver callweaver 196, 253 2008-01-31 18:16 timer
##############
#cat /proc/zaptel/3
Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" (MASTER) B8ZS/ESF
Timing slips: 100
63 TE4/0/3/1 FXOLS
64 TE4/0/3/2 FXOLS
[ ... ]
86 TE4/0/3/24 FXOLS
Any idea?
==============================================================
Antonio
_______________________________________________
Callweaver-users mailing list
[email protected]
http://lists.callweaver.org/mailman/listinfo/callweaver-users
