Dear CallWeaver Users, Using callweaver RC5 with a Linksys PAP2T-NA ata on a PowerMac G4 dual processor 500MHz, 1.5GB RAM, gigabit enet.
One more problem. After an outgoing call is made, DTMF tones to control voicemail or set up forwarding or join a conference call are intermittent and unreliable. Rarely can i get it to work. If i enter 10 digits it gets 7 of them by randomly dropping 3 of them. DTMF within Callweaver internally on the LAN, for example calling voicemail and entering mailbox and password, work just fine. PAP2T configured to have DTMF Tx mode set to AUTO (not InBand, AVT, Info), Preferred codec is G711u and set to only use preferred, and DTMF Tx Mode is "Strict". Have tried all of DTMF Tx modes, still no luck. Makes me think DTMF out of callweaver or through my ITSP is the problem. CallWeaver sip.conf is set to use dtmfmode=rfc2833 for calls to the outside world via my SIP provider. The sip.conf entry for the PAP2T lines have dtmfmode=rfc2833 set as well. Any thoughts? Peace, _______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
