On Oct 1, 2008, at 3:17 PM, Max CtRiX wrote:
> Daniel Melnechuk ha scritto:
>
>> I believe i do not need T38Gateway() since my sip provider says they
>> have T38 outgoing working and CW should just be sending out the T38
>> connection to my sip provider or where ever it is told to send the
>> UDPTL packets. T38Gateway() is for the situation where i had analog
>> lines coming into CW and was using them instead of a sip provider who
>> supports T38. Correct?
>
> Not completely correct.
> T38Gateway() is a replacement of Dial(), actually with less functions.
>
> When there is a fax involved, you should always prefer T38gw.
>
> I suggest to use T38 Gateway and report back.
>
> Max
I used T38Gateway() in my extensions.conf for dialing out for FAX
(prefix fax number with 6 which is replaced in T38Gateway() with a 1):
exten => _6NXXNXXXXXX,1,T38Gateway(SIP/1${EXTEN:[EMAIL PROTECTED],,r)
exten => _6NXXNXXXXXX,n,Verbose("Faxpages sent: ${FAXPAGES}")
exten => _6NXXNXXXXXX,n,Congestion()
exten => _6NXXNXXXXXX,n,Hangup
I then tried FAX call. Console said call was answered but it failed to
send the fax page (Verbose said 0 pages sent) and failed really
quickly. I have not done a wireshark trace nor debug log stuff yet. Is
that the next step while using T38Gateway() extension config? Should i
zip them all up and post here or somewhere else? Or does anyone have
any more ideas?
Peace,
Dan
_______________________________________________
Callweaver-users mailing list
[email protected]
http://lists.callweaver.org/mailman/listinfo/callweaver-users
