Sorry, I made a mistake in my earlier email. When system generator runs, it should put output files into the 'sysgen' directory in the build directory. Do you see the ngc files there? After this, XST is run again on the system generator output to generate the file <design_name>.ngc. This file should be a self-contained blackbox, i.e. you won't need any of the other files. This file is then moved to XPS_ROACH_base/pcores/<design_name>/netlist/ and packaged as an EDK pcore.
Hope that helps, -Suraj On Wed, 11 Aug 2010 14:11:24 -0700, Mandana Amiri <[email protected]> wrote: > Suraj, > > You are right, those ngc files do not exist, but System Generator > reports successful compilation. Any hint on what I could check for? > > m > ps I didn't notice that reply-to was not set to the casper list ... > > -------- Original Message -------- > Subject: Re: [casper] bee_xps fails when building tutorial 3 for Roach > Date: Tue, 10 Aug 2010 17:59:37 -0700 > From: Suraj Gowda <[email protected]> > To: Mandana Amiri <[email protected]> > References: <[email protected]> > <[email protected]> > <[email protected]> > <[email protected]> > <[email protected]> > > > > Do you see a file named > dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1.ngc? As the name implies, > it's a distributed memory. I know it's from the unscrambler because of the > net name given in the Xilinx error message. You're right that it can't find > a block name, but any block it can't find a hdl definition for is assumed > to be a Xilinx primitive (which this is not.) or blackboxed in a .ngc > > An .ngc file is generated only for Xilinx primitives, which is why there > isn't one for the FFT/PFB. > > Also, try to reply-all to the list, lots of people are unfamiliar with > Xilinx tools. > > -Suraj > > On Tue, 10 Aug 2010 17:30:56 -0700, Mandana Amiri <[email protected]> > wrote: >> Suraj, >> >> Which ngc file do I need to check for? There are many ngc files, but >> none for fft_wideband or pfb. >> Aren't those labels block names as oppose to ngc filenames? >> Thanks for your help, >> m >> Suraj Gowda wrote: >>> Hi Mandana, >>> >>> Your error is not a Simulink error. It seems that Xilinx's synthesizer >>> can't find the distributed RAM block used in the ROM for the FFT >>> unscrambler. Check in the XPS_ROACH_base/implementation for your > design >>> and see if you can find the ngc netlists that it mentions. If not, >>> system >>> generator may not have finished properly. >>> >>> -Suraj >>> >>> On Tue, 10 Aug 2010 16:20:11 -0700 (PDT), [email protected] wrote: >>> >>>> Hi Mark, >>>> >>>> When I load the new mdl and use latest git libraries, I get many >>>> >>> warnings >>> >>>> about SID and LibraryVersion which I assume are fine. Then bee_xps > gives >>>> the same 9 errors as before. See below. >>>> >>>> Any ideas? >>>> >>>> Thanks, >>>> Mandana >>>> >>>> <snip> >>>> Warning: In instantiating linked block >>>> >>>> >>> > 'r_spec_2048_r105/fft_wideband_real1/fft_biplex_real_4x0/biplex_core/fft_stage_1/Delay' >>> >>>> : Xilinx >>>> Delay Block block (mask) does not have a parameter named >>>> >>> 'LibraryVersion'. >>> >>>> Warning: In instantiating linked block >>>> >>>> >>> > 'r_spec_2048_r105/fft_wideband_real1/fft_biplex_real_4x0/biplex_core/fft_stage_1/Counter' >>> >>>> : >>>> Xilinx Counter Block block (mask) does not have a parameter named > 'SID'. >>>> Warning: In instantiating linked block >>>> >>>> >>> > 'r_spec_2048_r105/fft_wideband_real1/fft_biplex_real_4x0/biplex_core/fft_stage_1/Counter' >>> >>>> : >>>> Xilinx Counter Block block (mask) does not have a parameter named >>>> 'LibraryVersion'. >>>> <snip> >>>> >>>> after bee_xps: >>>> >>>> <snip> >>>> Annotating Constraints... >>>> ... >>>> Checking Partitions >>>> .... >>>> ... >>>> ERROR:NgdBuild:604 - logical block >>>> >>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>> >>>> >>> > 8_r105_x0/fft_wideband_real1_a035821448/fft_unscrambler_d229b5935a/reorder_89 >>> >>>> 51e0b30c/map9/comp5.core_instance5/BU2' with type >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>> resolved. A >>>> pin name misspelling can cause this, a missing edif or ngc file, or >>>> >>> the >>> >>>> misspelling of a type name. Symbol >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported > in >>>> target >>>> 'virtex5'. >>>> ERROR:NgdBuild:604 - logical block >>>> >>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>> >>>> >>> > 8_r105_x0/fft_wideband_real1_a035821448/fft_unscrambler_d229b5935a/reorder_89 >>> >>>> 51e0b30c/map8/comp5.core_instance5/BU2' with type >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>> resolved. A >>>> pin name misspelling can cause this, a missing edif or ngc file, or >>>> >>> the >>> >>>> misspelling of a type name. Symbol >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported > in >>>> target >>>> 'virtex5'. >>>> ERROR:NgdBuild:604 - logical block >>>> >>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>> >>>> >>> > 8_r105_x0/fft_wideband_real1_a035821448/fft_unscrambler_d229b5935a/reorder_89 >>> >>>> 51e0b30c/map7/comp5.core_instance5/BU2' with type >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>> resolved. A >>>> pin name misspelling can cause this, a missing edif or ngc file, or >>>> >>> the >>> >>>> misspelling of a type name. Symbol >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported > in >>>> target >>>> 'virtex5'. >>>> ERROR:NgdBuild:604 - logical block >>>> >>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>> >>>> >>> > 8_r105_x0/fft_wideband_real1_a035821448/fft_unscrambler_d229b5935a/reorder_89 >>> >>>> 51e0b30c/map6/comp5.core_instance5/BU2' with type >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>> resolved. A >>>> pin name misspelling can cause this, a missing edif or ngc file, or >>>> >>> the >>> >>>> misspelling of a type name. Symbol >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported > in >>>> target >>>> 'virtex5'. >>>> ERROR:NgdBuild:604 - logical block >>>> >>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>> >>>> >>> > 8_r105_x0/fft_wideband_real1_a035821448/fft_unscrambler_d229b5935a/reorder_89 >>> >>>> 51e0b30c/map5/comp5.core_instance5/BU2' with type >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>> resolved. A >>>> pin name misspelling can cause this, a missing edif or ngc file, or >>>> >>> the >>> >>>> misspelling of a type name. Symbol >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported > in >>>> target >>>> 'virtex5'. >>>> ERROR:NgdBuild:604 - logical block >>>> >>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>> >>>> >>> > 8_r105_x0/fft_wideband_real1_a035821448/fft_unscrambler_d229b5935a/reorder_89 >>> >>>> 51e0b30c/map4/comp5.core_instance5/BU2' with type >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>> resolved. A >>>> pin name misspelling can cause this, a missing edif or ngc file, or >>>> >>> the >>> >>>> misspelling of a type name. Symbol >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported > in >>>> target >>>> 'virtex5'. >>>> ERROR:NgdBuild:604 - logical block >>>> >>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>> >>>> >>> > 8_r105_x0/fft_wideband_real1_a035821448/fft_unscrambler_d229b5935a/reorder_89 >>> >>>> 51e0b30c/map3/comp5.core_instance5/BU2' with type >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>> resolved. A >>>> pin name misspelling can cause this, a missing edif or ngc file, or >>>> >>> the >>> >>>> misspelling of a type name. Symbol >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported > in >>>> target >>>> 'virtex5'. >>>> ERROR:NgdBuild:604 - logical block >>>> >>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>> >>>> >>> > 8_r105_x0/fft_wideband_real1_a035821448/fft_unscrambler_d229b5935a/reorder_89 >>> >>>> 51e0b30c/map2/comp5.core_instance5/BU2' with type >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>> resolved. A >>>> pin name misspelling can cause this, a missing edif or ngc file, or >>>> >>> the >>> >>>> misspelling of a type name. Symbol >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported > in >>>> target >>>> 'virtex5'. >>>> ERROR:NgdBuild:604 - logical block >>>> >>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>> >>>> >>> > 8_r105_x0/fft_wideband_real1_a035821448/fft_unscrambler_d229b5935a/reorder_89 >>> >>>> 51e0b30c/map1/comp5.core_instance5/BU2' with type >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>> resolved. A >>>> pin name misspelling can cause this, a missing edif or ngc file, or >>>> >>> the >>> >>>> misspelling of a type name. Symbol >>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported > in >>>> target >>>> 'virtex5'. >>>> .... >>>> ....more warnings >>>> .... >>>> >>>> ....Partition Implementation Status >>>> ------------------------------- >>>> >>>> No Partitions were found in this design. >>>> >>>> ------------------------------- >>>> >>>> NGDBUILD Design Results Summary: >>>> Number of errors: 9 >>>> Number of warnings: 2199 >>>> >>>> Total REAL time to NGDBUILD completion: 49 sec >>>> Total CPU time to NGDBUILD completion: 28 sec >>>> >>>> One or more errors were found during NGDBUILD. No NGD file will be >>>> written. >>>> >>>> Writing NGDBUILD log file "system.bld"... >>>> ERROR:Xflow - Program ngdbuild returned error code 2. Aborting flow >>>> execution... >>>> >>>> gmake: *** [__xps/system_routed] Error 1 >>>> ERROR:EDK - Error while running "gmake -f system.make bits". >>>> Return code = 2 >>>> No changes to be saved in MSS file >>>> Saved project XMP file >>>> cp: cannot stat `implementation/system.bit': No such file or directory >>>> bit file open failed >>>> chmod: cannot access `implementation/system.bof': No such file or >>>> >>> directory >>> >>>> cp: cannot stat `implementation/system.bof': No such file or directory >>>> >>>> Error using ==> gen_xps_files at 689 >>>> Programation files generation failed, EDK compilation probably also >>>> >>> failed. >>> >>>> >>>> >>>> >>>> >>>>> Hi Mandana, >>>>> >>>>> Thanks for trying this out. I just looked at the design, and it >>>>> >>> appears >>> >>>>> I >>>>> didn't >>>>> update it with the newest fft and pfb. I just now did this. Can you >>>>> >>>>> svn co >>>>> >>>>> >>> > http://casper.berkeley.edu/svn/trunk/ref_designs_tutorials/workshop_2010/roach_tut3_wideband_spec/ >>> >>>>> and using the newest clone of mlib_dewel, try and compile the r105 >>>>> >>> model >>> >>>>> file? >>>>> It just worked for me. >>>>> >>>>> If you're still having issues, let me know. >>>>> >>>>> Thanks, >>>>> Mark >>>>> >>>>> >>>>> On Mon, Aug 9, 2010 at 3:22 PM, <[email protected]> wrote: >>>>> >>>>> >>>>>> Hi, >>>>>> >>>>>> I am trying to build the wideband spectrometer mdl file for Roach > and >>>>>> when >>>>>> I run bee_xps, it fails. Errors are listed below. I tried this with >>>>>> >>> the >>> >>>>>> latest mlib_devel10.1 from svn and also with mlib_devel cloned from >>>>>> >>> git >>> >>>>>> and they both fail the same way. (I can not locate >>>>>> 'ref_designs_tutorials' >>>>>> directory in git, but I assume the latest svn version is fine). >>>>>> >>>>>> I noticed that when I open the tut3 mdl file, there are broken links >>>>>> >>> in >>> >>>>>> the fft and pfb blocks, so I deleted these blocks and replaced them >>>>>> >>> with >>> >>>>>> new ones from the library. The PFB block has an additional > parameter: >>>>>> Fold >>>>>> adders into DSPs and I leave it as checked! >>>>>> >>>>>> Any chance you have seen this error before? Please advise. >>>>>> >>>>>> Thanks >>>>>> Mandana >>>>>> ps I can successfully build tutorial 1 and iADC tutorial >>>>>> pss For Tutorial 3, if I just go to system Generator block and press >>>>>> generate, it finishes with comiled successfully. However, bee_xps >>>>>> >>> fails >>> >>>>>> --------------------------------- Version Log ------------- >>>>>> Version Path >>>>>> System Generator 11.5.2275 /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen >>>>>> AccelDSP 11.5.2275 > /opt/Xilinx/11.1/DSP_Tools/lin64/AccelDSP >>>>>> Matlab 7.7.0.471 (R2008b) /usr/local/matlab_2008b >>>>>> ISE 11.5.i /opt/Xilinx/11.1/ISE >>>>>> >>>>>> and in xflow.log I have: >>>>>> <snip> >>>>>> >>>>>> ERROR:NgdBuild:604 - logical block >>>>>> >>>>>> >>>>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>>>> >>> > 8_r105_x0/fft_wideband_real_b9aab9e8c9/fft_unscrambler_d7ee91cd7f/reorder_71b >>> >>>>>> a0a1129/map9/comp5.core_instance5/BU2' with type >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>>>> resolved. >>>>>> A >>>>>> pin name misspelling can cause this, a missing edif or ngc file, > or >>>>>> the >>>>>> misspelling of a type name. Symbol >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported >>>>>> >>> in >>> >>>>>> target >>>>>> 'virtex5'. >>>>>> ERROR:NgdBuild:604 - logical block >>>>>> >>>>>> >>>>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>>>> >>> > 8_r105_x0/fft_wideband_real_b9aab9e8c9/fft_unscrambler_d7ee91cd7f/reorder_71b >>> >>>>>> a0a1129/map8/comp5.core_instance5/BU2' with type >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>>>> resolved. >>>>>> A >>>>>> pin name misspelling can cause this, a missing edif or ngc file, > or >>>>>> the >>>>>> misspelling of a type name. Symbol >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported >>>>>> >>> in >>> >>>>>> target >>>>>> 'virtex5'. >>>>>> ERROR:NgdBuild:604 - logical block >>>>>> >>>>>> >>>>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>>>> >>> > 8_r105_x0/fft_wideband_real_b9aab9e8c9/fft_unscrambler_d7ee91cd7f/reorder_71b >>> >>>>>> a0a1129/map7/comp5.core_instance5/BU2' with type >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>>>> resolved. >>>>>> A >>>>>> pin name misspelling can cause this, a missing edif or ngc file, > or >>>>>> the >>>>>> misspelling of a type name. Symbol >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported >>>>>> >>> in >>> >>>>>> target >>>>>> 'virtex5'. >>>>>> ERROR:NgdBuild:604 - logical block >>>>>> >>>>>> >>>>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>>>> >>> > 8_r105_x0/fft_wideband_real_b9aab9e8c9/fft_unscrambler_d7ee91cd7f/reorder_71b >>> >>>>>> a0a1129/map6/comp5.core_instance5/BU2' with type >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>>>> resolved. >>>>>> A >>>>>> pin name misspelling can cause this, a missing edif or ngc file, > or >>>>>> the >>>>>> misspelling of a type name. Symbol >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported >>>>>> >>> in >>> >>>>>> target >>>>>> 'virtex5'. >>>>>> ERROR:NgdBuild:604 - logical block >>>>>> >>>>>> >>>>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>>>> >>> > 8_r105_x0/fft_wideband_real_b9aab9e8c9/fft_unscrambler_d7ee91cd7f/reorder_71b >>> >>>>>> a0a1129/map5/comp5.core_instance5/BU2' with type >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>>>> resolved. >>>>>> A >>>>>> pin name misspelling can cause this, a missing edif or ngc file, > or >>>>>> the >>>>>> misspelling of a type name. Symbol >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported >>>>>> >>> in >>> >>>>>> target >>>>>> 'virtex5'. >>>>>> ERROR:NgdBuild:604 - logical block >>>>>> >>>>>> >>>>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>>>> >>> > 8_r105_x0/fft_wideband_real_b9aab9e8c9/fft_unscrambler_d7ee91cd7f/reorder_71b >>> >>>>>> a0a1129/map4/comp5.core_instance5/BU2' with type >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>>>> resolved. >>>>>> A >>>>>> pin name misspelling can cause this, a missing edif or ngc file, > or >>>>>> the >>>>>> misspelling of a type name. Symbol >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported >>>>>> >>> in >>> >>>>>> target >>>>>> 'virtex5'. >>>>>> ERROR:NgdBuild:604 - logical block >>>>>> >>>>>> >>>>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>>>> >>> > 8_r105_x0/fft_wideband_real_b9aab9e8c9/fft_unscrambler_d7ee91cd7f/reorder_71b >>> >>>>>> a0a1129/map3/comp5.core_instance5/BU2' with type >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>>>> resolved. >>>>>> A >>>>>> pin name misspelling can cause this, a missing edif or ngc file, > or >>>>>> the >>>>>> misspelling of a type name. Symbol >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported >>>>>> >>> in >>> >>>>>> target >>>>>> 'virtex5'. >>>>>> ERROR:NgdBuild:604 - logical block >>>>>> >>>>>> >>>>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>>>> >>> > 8_r105_x0/fft_wideband_real_b9aab9e8c9/fft_unscrambler_d7ee91cd7f/reorder_71b >>> >>>>>> a0a1129/map2/comp5.core_instance5/BU2' with type >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>>>> resolved. >>>>>> A >>>>>> pin name misspelling can cause this, a missing edif or ngc file, > or >>>>>> the >>>>>> misspelling of a type name. Symbol >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported >>>>>> >>> in >>> >>>>>> target >>>>>> 'virtex5'. >>>>>> ERROR:NgdBuild:604 - logical block >>>>>> >>>>>> >>>>>> >>> > 'r_spec_2048_r105_XSG_core_config/r_spec_2048_r105_XSG_core_config/r_spec_204 >>> >>>>>> >>> > 8_r105_x0/fft_wideband_real_b9aab9e8c9/fft_unscrambler_d7ee91cd7f/reorder_71b >>> >>>>>> a0a1129/map1/comp5.core_instance5/BU2' with type >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' could not be >>>>>> resolved. >>>>>> A >>>>>> pin name misspelling can cause this, a missing edif or ngc file, > or >>>>>> the >>>>>> misspelling of a type name. Symbol >>>>>> 'dmg_43_c2a1bee36c7e7174_dist_mem_gen_v4_3_xst_1' is not supported >>>>>> >>> in >>> >>>>>> target >>>>>> 'virtex5'. >>>>>> >>>>>> <snip> >>>>>> Partition Implementation Status >>>>>> ------------------------------- >>>>>> >>>>>> No Partitions were found in this design. >>>>>> >>>>>> ------------------------------- >>>>>> >>>>>> NGDBUILD Design Results Summary: >>>>>> Number of errors: 9 >>>>>> Number of warnings: 2243 >>>>>> >>>>>> Total REAL time to NGDBUILD completion: 49 sec >>>>>> Total CPU time to NGDBUILD completion: 28 sec >>>>>> >>>>>> One or more errors were found during NGDBUILD. No NGD file will be >>>>>> written. >>>>>> >>>>>> Writing NGDBUILD log file "system.bld"... >>>>>> ERROR:Xflow - Program ngdbuild returned error code 2. Aborting flow >>>>>> execution... >>>>>> >>>>>> gmake: *** [__xps/system_routed] Error 1 >>>>>> ERROR:EDK - Error while running "gmake -f system.make bits". >>>>>> Return code = 2 >>>>>> No changes to be saved in MSS file >>>>>> Saved project XMP file >>>>>> cp: cannot stat `implementation/system.bit': No such file or > directory >>>>>> bit file open failed >>>>>> chmod: cannot access `implementation/system.bof': No such file or >>>>>> directory >>>>>> cp: cannot stat `implementation/system.bof': No such file or > directory >>>>>> >>>>>> Error using ==> gen_xps_files at 689 >>>>>> Programation files generation failed, EDK compilation probably also >>>>>> failed. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>> >>>
