Hi Mark,
I tried running ctrl-D and updating my design and then
re-compiling with 'bee_xps' (version 1.1). The compilation process crashed
once more with the exact same message in the dialogue box as before. The
output within the MATLAB command window is as follows:
Detected Linux OS
#############################
## System Update ##
#############################
Warning: The model 'tutorial1_revisited' does not have continuous states,
hence Simulink is using the solver 'VariableStepDiscrete' instead of
solver 'ode45'. You can disable this diagnostic by explicitly specifying
a discrete solver in the solver tab of the Configuration Parameters
dialog, or by setting the 'Automatic solver parameter selection'
diagnostic to 'none' in the Diagnostics tab of the Configuration
Parameters dialog.
> In gen_xps_files at 199
In bee_xps>run_Callback at 150
In bee_xps at 82
Warning: Using a default value of 0.2 for maximum step size. The
simulation step size will be equal to or less than this value. You can
disable this diagnostic by setting 'Automatic solver parameter selection'
diagnostic to 'none' in the Diagnostics page of the configuration
parameters dialog.
> In gen_xps_files at 199
In bee_xps>run_Callback at 150
In bee_xps at 82
#############################
## Block objects creation ##
#############################
######################
## Checking objects ##
######################
Running system generator ...
Warning: The model 'tutorial1_revisited' does not have continuous states,
hence Simulink is using the solver 'VariableStepDiscrete' instead of
solver 'ode45'. You can disable this diagnostic by explicitly specifying
a discrete solver in the solver tab of the Configuration Parameters
dialog, or by setting the 'Automatic solver parameter selection'
diagnostic to 'none' in the Diagnostics tab of the Configuration
Parameters dialog.
> In
/opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlCompileGenerateMdl.p>xlCompileGenerateMdl
at 181
In
/opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlGenerateButton.p>xlGenerateButton
at 281
In gen_xps_files at 324
In bee_xps>run_Callback at 150
In bee_xps at 82
Warning: Using a default value of 0.2 for maximum step size. The
simulation step size will be equal to or less than this value. You can
disable this diagnostic by setting 'Automatic solver parameter
selection' diagnostic to 'none' in the Diagnostics page of the
configuration parameters dialog.
> In
/opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlCompileGenerateMdl.p>xlCompileGenerateMdl
at 181
In
/opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlGenerateButton.p>xlGenerateButton
at 281
In gen_xps_files at 324
In bee_xps>run_Callback at 150
In bee_xps at 82
>>
I'm at a complete loss as to what may be causing this problem. If you (or
anyone else reading this) know of any other troubleshooting procedures that
may help pin down the problem it would be greatly appreciated.
Thanks,
Louis
On Mon, Jul 11, 2011 at 2:01 PM, Mark Wagner <mwag...@ssl.berkeley.edu>wrote:
> Hi Louis,
>
> Can you run control-D to update the design? This will propagate the data
> types
> and may give you some idea where the issue lies.
>
> Mark
>
>
> On Fri, Jul 8, 2011 at 9:27 PM, Louis Dartez <louisdar...@gmail.com>wrote:
>
>>
>> Hello,
>>
>> I've been trying to compile tutorial 1 using the bee_xps
>> command on MATLAB. After waiting a while I get a dialogue box titled 'NGC
>> Netlisting Error' with the following errors:
>>
>> [: 21:
>>
>> /opt/Xilinx/11.1/ISE/lib/lin64:/opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/lib:
>> /usr/local/MATLAB/R2009a/sys/os/glnxa64:/usr/local/MATLAB/R2009a/bin/glnxa64:/usr/local/MATLAB/R2009a/extern/lib/glnxa64:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64/native_threads:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64:/opt/Xilinx/11.1/ISE/bin/lin64:
>> unexpected operator
>>
>> [: 22:
>>
>> /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/lib:/opt/Xilinx/11.1/ISE/lib/lin64:
>> /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/lib:/usr/local/MATLAB/R2009a/sys/os/glnxa64:/usr/local/MATLAB/R2009a/bin/glnxa64:/usr/local/MATLAB/R2009a/extern/lib/glnxa64:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64/native_threads:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64/server:/usr/local/MATLAB/R2009a/sys/java/jre/glnxa64/jre/lib/amd64:/opt/Xilinx/11.1/ISE/bin/lin64:
>> unexpected operator
>>
>> In addition to the dialogue box above, I'm getting the following output
>> within the MATLAB prompt:
>>
>> > In
>> /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlCompileGenerateMdl.p>xlCompileGenerateMdl
>> at 181
>> In
>> /opt/Xilinx/11.1/DSP_Tools/lin64/sysgen/bin/xlGenerateButton.p>xlGenerateButton
>> at 281
>> In gen_xps_files at 324
>> In bee_xps>run_Callback at 150
>> In bee_xps at 82
>> Error using ==> gen_xps_files at 328
>> XSG generation failed:
>>
>> Any Ideas as to what may be behind these errors? Any advice would be
>> appreciated.
>>
>> Thanks,
>>
> --
-- Louis Dartez
(956) 372-5812
Arecibo Remote Command Center Scholar
Center for Gravitational Wave Astronomy
University of Texas at Brownsville
> --
>> -- Louis Dartez
>> (956) 372-5812
>> Arecibo Remote Command Center Scholar
>> Center for Gravitational Wave Astronomy
>> University of Texas at Brownsville
>>
>
>
