Hi Guys I have never experienced this. Can you provide the versions of the tool and OS you are running?
Wes On 22 Oct 2013 20:51, "Ryan Monroe" <ryan.m.mon...@gmail.com> wrote: > I've also experienced these. The most common cause seems to be a constant > which is not "sampled". I don't have a good rule, but sometimes when I > start removing components on my design, it starts working, which shows me > the element at fault. In general, placing a component which is known to > work on its own into a larger system does not cause problems. > > Then there's also the times where I reduce the entire system to something > trivial like a counter and it still happens. In that case I save copies of > everything and reboot. Followed by anger management. > On Oct 22, 2013 11:44 AM, "Ross Williamson" <rwilliam...@astro.caltech.edu> > wrote: > >> I'm in a rather frustrating situation where the casper tools will only >> compile in a seemingly random nature. I can load up a design that I >> know compiles into simulink and run it and I will get an error like >> the following: >> >> Error reported by S-function 'sysgen' in >> 'ccat_corr_lowbits/ADC0/Constant6': >> An internal error occurred in the Xilinx Blockset Library. >> >> There is nothing obviously wrong with the constant (and the whole .slx >> has compiled as is before) >> >> Shutting down and starting up matlab sometimes fixes the issue - >> trying to compiled a different .slx and then going back to the one >> that doesn't work sometimes fixes it (Sometimes does not) - I can >> screw around a whole day trying to get it to compile and the next day >> it works fine. >> >> Has anyone experienced this (pseudo) random compile problems and know >> of a good sequence to make a model compile again? >> >> Ross >> >> >> -- >> Ross Williamson >> Research Scientist - Sub-mm Group >> California Institute of Technology >> 626-395-2647 (office) >> 312-504-3051 (Cell) >> >>