I find it hard to keep the iBob's ZDok+, SMA and XAUI connector
labels straight given the differences on the PCB silkscreen
vs the toolflow vs the faceplate so I use this
https://casper.berkeley.edu/wiki/images/a/ad/IBob_picture_with_labels.pdf
it's found in the Block Diagram section of the iBob wiki page
https://casper.berkeley.edu/wiki/IBOB#Description
Please let me know of any/all corrections to make.
On Wed, 18 Jun 2014, John Ford wrote:
Date: Wed, 18 Jun 2014 13:39:25 -0400
From: John Ford <jf...@nrao.edu>
To: Rolando Paz <flx...@gmail.com>
Cc: "casper@lists.berkeley.edu" <casper@lists.berkeley.edu>
Subject: Re: [casper] simple questions about IBOB
Two simple questions :-)
1) How I can identify who is zdok0 and zdok1 in a IBOB?
zdok-1 is nearest the power connector.
2) What should I do to avoid erase the FPGA firmware, when I turn off the
IBOB?
http://casper.berkeley.edu/memos/ibob_prom_proc.pdf
John
Best Regards
Rolando Paz
