Hello Neil, CASPER tools could probably do what you're looking for, but I found your description a bit confusing. You're going to need to clarify somewhat.
Regards, James On Fri, Dec 18, 2015 at 4:15 PM, Neil Salmon <n.sal...@mmu.ac.uk> wrote: > Anyone help? > > > > I’m working in academia and need to build a 300-receiver channel > single-bit digitiser / cross-correlator with a single frequency channel > having a bandwidth of 300 MHz, centre frequency ~3 GHz. The single bit > digitisers sample I&Q giving a total data rate of 180 Gbps and using XOR > gates to do the cross-correlations, the total computation rate is 54 T XOR > operations per second. I need to accumulate cross-correlations typically > for times ranging from 10 ms to a few seconds. The system would comprise an > array of single bit digitisers linked via a high speed data bus to FPGA > boards for the cross-correlation/accumulation. I’ve no skills in board > design but could probably learn VHDL. I don’t have funding to commission a > design and build but wondered if anyone in this community could advise how > I should go about building this system at our university. > > > > Thank you for any help you can provide. > > > > Neil > "Before acting on this email or opening any attachments you should read > the Manchester Metropolitan University email disclaimer available on its > website http://www.mmu.ac.uk/emaildisclaimer " >