The axes were not auto-scaled for the adder; you were correct. For the counter, the settings are correct; I just checked them again. Do you have any more ideas on this?
On Tue, Jun 14, 2016 at 2:04 PM, Jack Hickish <jackhick...@gmail.com> wrote: > For the adder, have you clicked the icon at the top marked with a pair of > binoculars to auto-scale the axes? > > For the counter, are your control signal and slicing definitely correct -- > i.e., is the reset of the counter 0, and the enable of the counter 1? > > Cheers > Jack > > On Tue, 14 Jun 2016 at 11:00 Christopher Barnes <barnc...@umich.edu> > wrote: > >> Jack, >> >> I'm not able to reproduce the counter output ( >> https://casper.berkeley.edu/wiki/File:Counter_sim.png) or the Adder >> Output (https://casper.berkeley.edu/wiki/File:Adder_sim.png). Instead >> of those two, I get a line at 0 for the counter output and then just an >> empty set of axes for the adder output. >> >> On Tue, Jun 14, 2016 at 1:56 PM, Jack Hickish <jackhick...@gmail.com> >> wrote: >> >>> Hi Christopher, >>> >>> Which scope outputs are you not able to reproduce from the wiki? What >>> outputs did you see? >>> >>> Cheers >>> Jack >>> >>> On Tue, 14 Jun 2016 at 10:21 Christopher Barnes <barnc...@umich.edu> >>> wrote: >>> >>>> Hello, >>>> >>>> My name is Christopher Barnes, and I'm a graduate student at the >>>> University of Michigan. I'm working through the first four tutorials on >>>> the Casper website (located at >>>> https://casper.berkeley.edu/wiki/Tutorials) to program a ROACH2 as a >>>> wideband pocket correlator. I've finished building the .mdl file from the >>>> first tutorial, and my output from the scopes did not match what is >>>> displayed on the webpage, so I'm requesting some help with this. I'm a >>>> beginner, so I'm not sure what the problem could be aside from the cookbook >>>> instructions on the website. >>>> >>>> If you're willing to help me, then please email me back and I can show >>>> you my file. My suspicion is that the discrepancy between my output and >>>> the output on the webpage is caused by an outdated release of the tools in >>>> Simulink. >>>> >>>> >>>> >> >> >> -- >> Physics Graduate Student Symposium >> University of Michigan >> sympphysg...@umich.edu >> Website <http://logan.physics.lsa.umich.edu/gss/> >> >> -- Physics Graduate Student Symposium University of Michigan sympphysg...@umich.edu Website <http://logan.physics.lsa.umich.edu/gss/>
