Hello Heystek,

You can probably use a "to workspace" sink, then you'll be able to display
the data however you want in some matlab code once the simulation is
finished running.

Canonically, just applying an FFT to frequency-domain data will get you
back into the time domain, multiplied by some scaling factor. You need both
halves of the symmetric FFT though, so the output of e.g. the
fft_wideband_real wouldn't be meaningful to apply another FFT to it.

Regards,
James




On Thu, Apr 23, 2020 at 9:40 AM Heystek Grobler <[email protected]>
wrote:

> Good day Casperites
>
> I have an interesting question. I am using a  FFT in simulink for the use
> in a spectrometer design. I want to test the output of the FFT by using
> some kind of scope. Simulink only has spectrum scope, that would be
> perfect, but the scope does a second FFT on the signal. The other option is
> a vector scope, but that does not give the result that I am looking for.
>
> Does anyone have a suggestion on how I can see the results of the FFT in
> simulink?
>
> Then I have another question. What would be expected if I do a FFT on a
> FFT? As far as I can figure out, the FFT of the FFT should just be time
> reversed?
>
> Thanks for the help!
>
> Heystek
>
> --
> You received this message because you are subscribed to the Google Groups "
> [email protected]" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/62AFF5A0-0980-4FB7-8CB8-C053590F655E%40gmail.com
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"[email protected]" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG67D373fmnXJ7Os7jrBGJyTbvRA835okUMO%2B0x8hTT%3DGzyKrg%40mail.gmail.com.

Reply via email to