Hi ! Wes, Thank you for your immediate response and reminding me about this issue on 1GbE yellow block. It really helps!!
Best regards, --June ในวันที่ อ. 11 ม.ค. 2022 เวลา 14:11 Wesley New <wes...@sarao.ac.za> เขียนว่า: > Hi June, > > Over what ethernet interface are you connecting to the SKARAB? 1GbE or > 40GbE. IIRC the boot firmware comes with both a 1gbe and 1 of the 40gbe > interfaces built in. The designs you mention would only have the 1 or more > 40gbe ethernet interfaces included. You would see the symptoms you are > describing if you initially connect via 1gbe and then it is not included in > the uploaded design. > > Hope this helps. > > Regards > > Wes > > > > On Mon, Jan 10, 2022 at 11:35 PM June Tantiparimongkol < > junepn...@gmail.com> wrote: > >> Hi! Casperities, >> >> I'm writing to you guys for question on Skarab upload and programming >> error. Now, we're trying to program some fpg file into the platform but it >> fails. The error shows "*ERROR 192.168.3.2 transport_skarab.py:755 - >> Skarab has not come back after programming.*" >> So, I have try on generate new fpg files with tutorial design without >> editing (in https://github.com/casper-astro/tutorials_devel.git ) and >> upload and program. After, when we upload and programm new fpg file from >> tut_intro, tut_40gbe, tut_hmc, it shows the same errors too (as shown in >> figure). On the other hand, it has no problem when we worked on tutorial by >> using the example fpg files which are provided within tutorial_devel >> folder. Also, it has no problem with new-generate fpg file from >> skarab_adc_test and tut_spec which we have to generate due to mezzanine >> site configuration. >> >> But there're some condition for our work that we have to generate new fpg >> file with our computer which has Ubuntu 20 OS due to our Ubuntu 18 OS has >> not enough resource to run on execution flow. >> >> So, I wonder that what is the problems. Could anyone suggest us about >> this please. >> >> Thanks and sincerely, >> -- June >> National Astronomical Research Institute of Thailand (NARIT) >> [image: Skarab has not come back after programming.png] >> >> -- >> You received this message because you are subscribed to the Google Groups >> "casper@lists.berkeley.edu" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to casper+unsubscr...@lists.berkeley.edu. >> To view this discussion on the web visit >> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CABKTCqFRWfX9ujJmfyXYF_h%3D_izsQB9MXM6yUxifByasV2Kv9g%40mail.gmail.com >> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CABKTCqFRWfX9ujJmfyXYF_h%3D_izsQB9MXM6yUxifByasV2Kv9g%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAE2vkmWHYEK0fnA35LOnBsvKJzXixB4_cgNB%3DYUgJckUwcmwRg%40mail.gmail.com > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAE2vkmWHYEK0fnA35LOnBsvKJzXixB4_cgNB%3DYUgJckUwcmwRg%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- Sincerely, June Tantiparimongkol e-mail address: junepn...@gmail.com -- You received this message because you are subscribed to the Google Groups "casper@lists.berkeley.edu" group. To unsubscribe from this group and stop receiving emails from it, send an email to casper+unsubscr...@lists.berkeley.edu. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CABKTCqFXEnk6Hh7M9PtvZu0W15A4Cu%2BWZ4GviqWe89Er7zMm5g%40mail.gmail.com.
