Quoting DaveBreski <[EMAIL PROTECTED]>:

> Ted -
> 
> I just attached the electric bilge pump on the end of the hose in the bilge
> that goes to the manual pump - works just fine for me.  I can still pump out
> using the manual pump and when the electric one runs it just goes through
> the manual pump.
> 
>  
> 
> Dave
> 
> C27 #5212
> 
> Windabout
> 
> Cape Cod, MA
> 
> http://dpbcc.home.comcast.net
> 
>   _____  
> 
> From: [email protected]
> [mailto:[EMAIL PROTECTED] On Behalf Of ted glynn
> Sent: Sunday, February 19, 2006 8:42 AM
> To: [email protected]
> Subject: catalina27-talk: Installing an automatic bilge pump while keeping
> the manual one operational
> 
>  
> 
> I'm looking for advice on how to install an automatic bilge pump on my 82
> Catalina 27. I'm still a new sailboater, having had mine less than 2 years
> now, so please forgive me if I use the wrong terms or don't explain it well.
> 
>  
> 
> My bilge is very dry and clean, but I worry about a leak when I'm not
> around, so would like to have the automatic bilge on "stand by" when I'm
> gone. I bought a Rule-Mate 500 automated bilge pump and 3-way lighted panel
> switch. I think I can figure out the electrical part ok.
> 
>  
> 
>  My first though was that I could use the same hose from the bilge that
> leads to the manual bilge pump in the compartment aft of the tiller and
> somehow, via a system of Y or T fittings and check valves, use the same
> thru-hull on the transom (which is above the water line). In other words,
> both manual and automatic bilge pumps would be operational (sort of "in
> parallel"), using largely the same hoses and thru-hull.
> 
>  
> 
> My first choice would be to run a second hose out the aft of my bilge, and
> have a totally redundant hose system, but there doesn't seem to be much room
> for it. I also know check-valves can be trouble if they fail.
> 
>  
> 
> I've kicked it around with other sailboaters on my dock without complete
> agreement on whether it would work, or would one siphon the other, etc.
> 
>  
> 
> Any advice, pictures, diagrams, etc. would be appreciated.
> 
>  
> 
> Ted Glynn
> 
> Rayo de Luna
> 
> 1982 Catalina 27 standard rig
> 
> Jefferson Beach Marina, St. Clair Shores, MI
> 
>  from del kleitz 3561-27----lone wolf ntc great lakes, il.
  just add a 3 way electrical switch between elect sourse and pump 
     one side middle off other side pump on and side pump in automatic, thru 
the float> 
> 




-------------------------------------------------

Reply via email to