If the $90 is one way, I would agree that the A-frame is a good idea.  If it is for both raise and lower, that would strike me as a good deal as compared with the DIY route.  You'll pay some for the materials and (although I have no direct experience with the procedure) the A-frame looks a bit stress-inducing.

If you do have the yard do the work, make sure you are there to supervise.  There have been too many stories about things like cutting antenna and anchor light leads because the workers were too impatient, dull or otherwise to look for a connector.

Being an anarchist at heart, I'd make my own evaluation of the gin pole and perhaps do some 2:00 am work on my mast.  Perhaps the condemnation was "economically induced"?

Free advice, and probably worth every cent.

Chris

At 09:08 PM 4/22/2006, you wrote:
I just found out when trying to use it that my sail club has condemned our gin pole.  I remember the previous discussions on an A-frame for raising and lowering the mast.  I found this description: http://members.aol.com/rhdeurer/mod-r3b.htm on Bob Deurer’s site.
 
Does anyone else have anything to add to what Bob did?  Any pictures of the A-frame in action?  My marina wants $90 to raise or lower the mast.  I’d certainly like to avoid this fee if I can.
 
Bob Mann
Lake St. Clair, MI

Reply via email to