Lance,
Hope the attachment comes through. This is rigging guide that I use, tending toward the middle of the pack. It is a survey of several boats from the Chesapeake Bay crowd on the old Sailnet list, but most of the people represented in the spreadsheet are here now and may have comments. Regards, Jim Reinardy C27 #4223 "Irie" Milwaukee, WI _____ From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Lance Jones Sent: Tuesday, June 19, 2007 7:42 PM To: [email protected] Subject: Re: catalina27-talk: Stay tension I had e-mailed a request for stay tension for a C-27TR. Any ideas? Lance Jones Cruising Captain, Barefoot Sailing Club Catalina 27TR SN 5455 Gaelforce! Capri 25 SN 411 Scottish Rebel! (AKA InstiGATOR) ----- Original Message ----- From: [EMAIL PROTECTED] To: [email protected] Sent: Tuesday, June 19, 2007 7:07 PM Subject: Re: catalina27-talk: Stiff new sails-Jib Harvey, I like your idea of a ring for handling my jib sails when the wind kicks up and I get the joy of going forward to bend on something smaller. I have a banana bag for my 135, but the work of using it while hobby horsing 4 or 5 feet in the air has put me off changing head sails :) Jim McEwen Tequila Chica Dana Point, CA Hi, Possible solution for controlling a take down of a new stiff jib. Make a ring about a foot or so in diameter from a soft wire, with a cable clamp. Cover any outstanding wire ends with tape. Tether it to the pulpit. As you take off the hanks, transfer them to the ring. This will give you control over the sail when it is detached. Put a couple of bungee cords areound the sail and stuff it down the forward hatch. Have your sail maker give you an oversize sail bag. Your current bag is really sized to a flaked and rolled up jib and will be too small for a couple of years. When you are back at the dock you can stuff it in the new bag. Sorry, not my original idea-originally thought from a round the world single handed sailor-Dodge Morgan. He called it a spider. I'm trying to figure out how to do it with a hank less furler jib. Any ideas? Hope this helps. Harvey Rosenberg C-27TR #6023, 1985, M-18
rigtension.xls
Description: MS-Excel spreadsheet
