Yes, you have to send it in. It's always been SECO South's policy that you send them the old cable(s) with turnbuckles and they make a matching assembly. The cable length portion changes based on the brand and generation of the turnbuckle so the overall length range is correct. So there's a lot of ways to have it come out wrong.
Phil Agur <http://www.catalina27.org/public_pages/profile270.htm> s/v Wing Tip Secretary, C270 LE #184 IC27/270A MMSI 366901790 www.catalina27.org <http://www.catalina27.org/> Vessel Doc# 1039809 -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of michael mcvey Sent: Thursday, November 06, 2008 2:30 PM To: [email protected] Subject: RE: catalina27-talk: Standing rigging not Running Rigging I had to call aboout the stay's they make them custom due to too many changes over the years at least that is what they told me. they will have you send in the stay so they have the correct length. _____ Date: Thu, 6 Nov 2008 13:16:57 -0800 From: [EMAIL PROTECTED] Subject: catalina27-talk: Standing rigging not Running Rigging To: [email protected] Michael, I looked at CD's website, but it didn't show anything for the forestay. Did you get it from there? Oh! Yeah! I guess I'm talking about standing rigging... DOH! --- On Fri, 11/7/08, michael mcvey <[EMAIL PROTECTED]> wrote: From: michael mcvey <[EMAIL PROTECTED]> Subject: RE: catalina27-talk: Running Rigging To: [email protected] Date: Friday, November 7, 2008, 5:05 AM cataloina direct was the best that I found But I would try the internet see if there are any better deals. _____ Date: Thu, 6 Nov 2008 11:39:10 -0800 From: [EMAIL PROTECTED] Subject: catalina27-talk: Running Rigging To: [email protected] Hello all, I decided to go with the all rope halyards since my current wire/rope halyards have frayed pretty badly this year. When I took a trip up the mast to see what would be involved in changing the sheaves I noticed that my forestay had some broken wires in that as well. So the mast is coming down, with a crane, instead of waiting for it to come down on it's own! Does anyone have a good source for running rigging? I have a roller furler and don't really know much about changing the forestay with one of these. It looks like it just runs through the foil, but without being able to take it off I haven't really tired to figure it out yet. So if anyone can offer some help with that I would certainly appreciate it! -Ivan _____ See how WindowsR connects the people, information, and fun that are part of your life Click <http://clk.atdmt.com/MRT/go/119463819/direct/01/> here _____ See how WindowsR connects the people, information, and fun that are part of your life Click <http://clk.atdmt.com/MRT/go/119463819/direct/01/> here
