Re: [OSL | CCIE_RS] Lab Exam Best Practices

[Kevin Porter]

This answer basically re-affirms the “Read the ENTIRE” lab thought (maybe a couple of times) before touching the CLI.  I recently took the R&S lab and found the “don’t use point-to-multipoint or the broadcast commands” in the redistribution section…   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Morris Sent: Sunday, July 16, 2006 11:09 PM To: 'Michael Senno'; ccie_rs@onlinestudylist.com Subject: Re: [OSL | CCIE_RS] Lab Exam Best Practices   As long as you don't violate any restrictions, you are welcome to do whatever you want!   Personally, I recommend that you keep things simple.  Which means little configuration changes normally, but may also mean whatever you are more familiar/comfortable with!   Just be very careful that there are no restrictions ANYPLACE in the lab that would prevent you from doing that.   HTH,   Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE #153, CISSP, et al. CCSI/JNCI-M/JNCI-J IPExpert VP - Curriculum Development IPExpert Sr. Technical Instructor [EMAIL PROTECTED] http://www.ipexpert.com       From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Senno Sent: Sunday, July 16, 2006 10:44 PM To: ccie_rs@onlinestudylist.com Subject: [OSL | CCIE_RS] Lab Exam Best Practices One thing we are always faced with in the lab is running OSPF over NBMA. There are multiple ways to handle this. When the lab does not specifically mention one is there any recommended method network type and procedure, point-to-multipoint vs. NBMA w/ static neighbors vs. broadcast with map statements including broadcasts?   Same thing with etherchannel and trunking. When no specific method is mentioned I’m assuming its fine to statically configure (ie. No DTP or PagP). Is this reasonable?   Michael J. Senno   [EMAIL PROTECTED] IM: [EMAIL PROTECTED] mobile: 917-273-1169   Add me to your address book... Want a signature like this?