I`ve just configured Frame-Relay Hub and Spoke, plus
point-to-point.
with point-to-point no problem, with Hub and spoke I pinged only
the spokes but not myself,same thing for both spokes, not
reachability for myself.
Can someone help me?
Straight forward the config for Hub:
interface Serial0/1/0
no ip address
encapsulation frame-relay
!
interface Serial0/1/0.100 multipoint
ip address 150.50.100.2 255.255.255.224
frame-relay map ip 150.50.100.5 205 broadcast
frame-relay map ip 150.50.100.6 206 broadcast
!
interface Serial0/1/0.104 point-to-point
ip address 150.50.24.2 255.255.255.0
frame-relay interface-dlci 104
!
interface Serial0/2/0
description Link to R5
ip address 150.50.9.2 255.255.255.192
clock rate 2000000
!
interface FastEthernet1/0
description Link to Switch1
no switchport
ip address 150.50.17.2 255.255.255.0
Spoke:
interface Loopback0
ip address 200.0.0.5 255.255.255.255
!
interface FastEthernet0/0
description Link to Switch1
ip address 150.50.7.5 255.255.255.128
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/1/0
ip address 150.50.100.5 255.255.255.224
encapsulation frame-relay
frame-relay map ip 150.50.100.2 502 broadcast
frame-relay map ip 150.50.100.6 506 broadcast
!
interface Serial0/2/0
description Link to R2
ip address 150.50.9.5 255.255.255.192
--
This message is intended for the individual(s) to whom it is addressed and may
contain information that is privileged or confidential.
If you are not the addressee you must not read,use or disclose the contents of
this email.
Whilst all reasonable care has been taken to avoid the transmission of viruses,
the recipient should carry out virus and other checks,
as they consider appropriate.
Myself accepts no responsibility in this regard.
