Ok, I see, so it is really not supported anymore. Just wanted to make sure that there is no secret how to match decnet :o)
Regards Roger Von: Scott Morris [mailto:[EMAIL PROTECTED] Gesendet: Dienstag, 8. April 2008 21:43 An: 'Roger'; [email protected] Betreff: RE: [OSL | CCIE_RS] V9 Task 5 Decnet not supported? Correct. That is being edited out at this point. I believe IPv6 was the protocol that I went with instead. HTH, Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al. CCSI/JNCI-M/JNCI-ER VP - Technical Training - IPexpert, Inc. IPexpert Sr. Technical Instructor [EMAIL PROTECTED] Telephone: +1.810.326.1444 Fax: +1.810.454.0130 http://www.ipexpert.com _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roger Sent: Tuesday, April 08, 2008 3:28 PM To: [email protected] Subject: [OSL | CCIE_RS] V9 Task 5 Decnet not supported? Hi all, On WB9 Task 5 priority queueing has to be configured. All Decnet traffic has to be placed in the normal queue. Well, I cannot choose Decnet in the protocol while configuring the priority-list. Has anyone an idea how else I could match Decnet traffic? Im using c2600-advipservicesk9-mz.124-18.bin. Thanks Roger
