Hi Dale,
No, I really cant match decnet, see the output below. But good advice about the default traffic, thanks. R1(config)#priority-list 1 protocol ? arp IP ARP bridge Bridging cdp Cisco Discovery Protocol clns ISO CLNS clns_es ISO CLNS End System clns_is ISO CLNS Intermediate System cmns ISO CMNS compressedtcp Compressed TCP (VJ) http HTTP ip IP ipv6 IPV6 llc2 llc2 pad PAD links pppoe PPP over Ethernet rsrb Remote Source-Route Bridging snapshot Snapshot routing support R1(config)#priority-list 1 protocol Regards Roger Von: Dale Kling [mailto:[EMAIL PROTECTED] Gesendet: Dienstag, 8. April 2008 21:48 An: Roger Cc: [email protected] Betreff: Re: [OSL | CCIE_RS] V9 Task 5 Decnet not supported? "priority-list 1 prot decnet normal " This command doesn't work? I guess worst case is if you can't specify decnet for some weird reason, you can set your default traffic to normal like this and since it's not specified it will fall in this queue. "priority-list 1 default normal" regards, Dale On Tue, Apr 8, 2008 at 3:27 PM, Roger <[EMAIL PROTECTED]> wrote: Hi all, On WB9 Task 5 priority queueing has to be configured. All Decnet traffic has to be placed in the normal queue. Well, I cannot choose Decnet in the protocol while configuring the priority-list. Has anyone an idea how else I could match Decnet traffic? I'm using c2600-advipservicesk9-mz.124-18.bin. Thanks Roger
