This was an editing error, the last sentence in the paragraph should have been removed, and there should not have been any DLCI references.
Additionally, the section task 2.2 should have had a title of "PPP" to indicate that multilink PPP should have been used, rather than multilink frame. The section should read: Configure the serial interfaces between R6 and R9. Use the address block 172.30.96.0/31. The address assigned to R6 should be numerically lower than the address assigned to R9. Configure the Serial link between R7 and R8 to for the subnet 172.30.78.100/31. CHAP authentication should be used, but R7 should not challenge R8. Marvin Greenlee, CCIE #12237 (R&S, SP, Sec) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: [EMAIL PROTECTED] Progress or excuses, which one are you making? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Suresh Mishra Sent: Saturday, June 28, 2008 4:48 PM To: OSL CCIE Routing and Switching Lab Exam Subject: [OSL | CCIE_RS] Vol2 -LAB 8 - Task 2.2 Hello all, I think the task here is for configuring multilink frame-relay but proctor guide has configured multilink PPP. I belive this should be corrected in the next version. Thanks Suresh
