Thanks for the update.
Suresh On Sat, Jun 28, 2008 at 5:29 PM, <[EMAIL PROTECTED]> wrote: > This was an editing error, the last sentence in the paragraph should have > been removed, and there should not have been any DLCI references. > > Additionally, the section task 2.2 should have had a title of "PPP" to > indicate that multilink PPP should have been used, rather than multilink > frame. > > The section should read: > > > Configure the serial interfaces between R6 and R9. Use the address block > 172.30.96.0/31. The address assigned to R6 should be numerically lower than > the address assigned to R9. > > Configure the Serial link between R7 and R8 to for the subnet > 172.30.78.100/31. CHAP authentication should be used, but R7 should not > challenge R8. > > > > > > Marvin Greenlee, CCIE #12237 (R&S, SP, Sec) > Senior Technical Instructor - IPexpert, Inc. > Telephone: +1.810.326.1444 > Fax: +1.810.454.0130 > Mailto: [EMAIL PROTECTED] > > Progress or excuses, which one are you making? > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Suresh Mishra > Sent: Saturday, June 28, 2008 4:48 PM > To: OSL CCIE Routing and Switching Lab Exam > Subject: [OSL | CCIE_RS] Vol2 -LAB 8 - Task 2.2 > > Hello all, > > I think the task here is for configuring multilink frame-relay but > proctor guide has configured multilink PPP. I belive this should be > corrected in the next version. > > > Thanks > Suresh > >
