Hi Tyson, 1) I created a topology with 2 3640's and saved the short .net file attached. My configs were saved as well (not attached here though). There were no pop-up errors or messages in the dynagen management console when I tried to open the project from the gns3 GUI. (I wonder why my .net did not specify the ram.)
2) I modified your .net file as directed and created the folders specified. (I haven't seen that ghostIMAGES field in other .net files. Is that from an older version?) Anyway, when I try to open the project from the gns3 gui, I get the same result as above. I have posted this problem to the gns3 forum but did not get a reply. I would appreciate your advice. Lee Lee On 6/25/09, Tyson Scott <[email protected]> wrote: > Attach a saved .net file and a .net file you are trying to load. > > Regards, > > Tyson Scott - CCIE #13513 R&S and Security > Technical Instructor - IPexpert, Inc. > > Telephone: +1.810.326.1444 > Cell: +1.248.504.7309 > Fax: +1.810.454.0130 > Mailto: [email protected] > > Join our free online support and peer group communities: > http://www.IPexpert.com/communities > > IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand > and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE > Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage > Lab Certifications. > > > -----Original Message----- > From: Lee Q [mailto:[email protected]] > Sent: Thursday, June 25, 2009 12:00 AM > To: Tyson Scott > Cc: [email protected] > Subject: Re: [OSL | CCIE_RS] cannot load .net files > > Tyson, > Yes, I can create topologies and save projects all day long; I can do > the labs that way. I just can't open a .net file. Once the project is > saved, I can't open it. I hit "open" and I just get a blank > workspace. > > It still could be an installation issue I suppose. I would appreciate > your suggestions. > > Thanks. > Lee > > On 6/24/09, Tyson Scott <[email protected]> wrote: >> Have you tried Adding a router from the interface and see if you can >> actually add an individual device. If you can't do that then you have an >> installation issue. >> >> Regards, >> >> Tyson Scott - CCIE #13513 R&S and Security >> Technical Instructor - IPexpert, Inc. >> >> Telephone: +1.810.326.1444 >> Cell: +1.248.504.7309 >> Fax: +1.810.454.0130 >> Mailto: [email protected] >> >> Join our free online support and peer group communities: >> http://www.IPexpert.com/communities >> >> IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On > Demand >> and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE >> Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage >> Lab Certifications. >> >> >> -----Original Message----- >> From: [email protected] >> [mailto:[email protected]] On Behalf Of Lee Q >> Sent: Wednesday, June 24, 2009 5:06 PM >> To: [email protected] >> Subject: [OSL | CCIE_RS] cannot load .net files >> >> Hello, >> >> I got gns3 working ok in vista, now I am trying to get it working in > ubuntu. >> I hope you can help me. Here is my problem: >> I can create projects and save them, but I cannot load a .net file, >> any .net file. >> >> I open gns3, everything looks fine, my hypervisor is all good, >> dynamips tests ok, I'm ready to go to town. >> >> But when I try to open a .net project from within gns3, I just get a >> blank workspace. >> I checked my paths in the .ini file and the .net files. What am I missing? >> >> Ubuntu 9.04 >> GNS3-0.6.2 >> >> Lee >> >> > >
two3640s.net
Description: Binary data
tyson.net
Description: Binary data
