BIDIR isn't an option with static rp-mapping for me. R4(config)#ip pim rp-address 200.7.46.6 override ? <cr>
The doc however, says it should be. The behavior is the same on 12.4.21 and 124.22.T ip pim rp-address To statically configure the address of a Protocol Independent Multicast (PIM) rendezvous point (RP) for multicast groups, use the *ip pim rp-address * command in global configuration mode. To remove an RP address, use the *no * form of this command. *ip pim *[*vrf* *vrf-name*] *rp-address* *rp-address* [*access-list*]* *[* override*] [*bidir*]
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
