Interesting! I also do not have it in IOS help but it takes the command : )
R1(config)#ip pim rp-address 1.1.1.1 ? <1-99> Access-list reference for group <1300-1999> Access-list reference for group (expanded range) WORD IP Named Standard Access list override Overrides dynamically learnt RP mappings <cr> R1(config)#ip pim rp-address 1.1.1.1 bidir R1(config)#do sh run | i bidir ip pim rp-address 1.1.1.1 bidir R1(config)#do sh ver | i 12.4 Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(3a), RELEASE SOFTWARE (fc2) On Fri, Aug 14, 2009 at 3:58 PM, Justin Guagliata <[email protected]> wrote: > BIDIR isn't an option with static rp-mapping for me. > > R4(config)#ip pim rp-address 200.7.46.6 override ? > <cr> > > The doc however, says it should be. The behavior is the same on 12.4.21 and > 124.22.T > ip pim rp-address > > To statically configure the address of a Protocol Independent Multicast > (PIM) rendezvous point (RP) for multicast groups, use the *ip pim > rp-address* command in global configuration mode. To remove an RP address, > use the *no* form of this command. > > *ip pim *[*vrf* *vrf-name*] *rp-address* *rp-address* [*access-list*]* *[* > override*] [*bidir*] > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- Regards, Joe Astorino - CCIE #24347 R&S Technical Instructor - IPexpert, Inc. Cell: +1.586.212.6107 Fax: +1.810.454.0130 Mailto: [email protected]
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
