So.yeah - I am not the brightest frame-relay star.
I seem to recall that in some configurations you just can't ping yourself - my topology works just fine but I wanted to make myself feel better so here's my basic Frame config (nothing special) I don't expect I can ping myself here: interface Serial0/1/0 ip address 142.42.64.6 255.255.224.0 encapsulation frame-relay clock rate 2000000 no frame-relay inverse-arp frame-relay lmi-type cisco end R6(config-fr-dlci)#do ping 142.42.64.4 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 142.42.64.4, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/3/4 ms R6(config-fr-dlci)#do ping 142.42.64.6 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 142.42.64.6, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) And I can't (and I get the same results on the other side of the interface - R4). Correct me if I am wrong please. Thanks, -Mike
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
