Hey,
I dont have those labs so I am not sure of the context but... One
thing did stand out!
The VLANs and the numbers... Not that its a bad thing but if I
remember correctly, if your going to use extended VLANs you have to
have the switches in VTP transparent mode.
Also, just check to make sure the switch has those VLANs... Simple I
know but have experienced that myself at one time!
HTHs
On Aug 16, 2009, at 5:46 AM, K Ploited wrote:
Hi,
I have a trouble with this task where my R9 - when created sub-
interfaces with dot1q (vlan 12,40,567,2200,2300) - can only
communicate with R8 (Vlan 2200). So, the eigrp can only get
200.0.0.8 not the rest. Could you please advise how I can
troubleshoot this ?
Thanks.
Best Regards,
K Ploited
Check the daily blob for the latest on what's happening around the
web What goes online, stays online
_______________________________________________
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
