You are missing several things in the redistribution. First of all the 'subnets' keyword on the EIGRP->OSPF redistribution. It could not be an issue, but you will advertise classfull prefixes. Besides that IOS will warn you for this!
The other thing is that you have to specify a metric when you redistribute into a distance vector protocol like RIP or EIGRP. Either by configuring a 'default metric' or by specifying this behind the redistribute command. -- Regards, Rick Mur CCIE2 #21946 (R&S / Service Provider) Sr. Support Engineer – IPexpert, Inc. URL: http://www.IPexpert.com On Sun, Aug 30, 2009 at 7:37 AM, Solomon Ayele <[email protected]> wrote: > hi, > what is missing? > should he include "subnet" or "metric" in "redistribute eigrp"? > > Rs > Solomon > > ------------------------------ > *From:* Bryan Bartik <[email protected]> > *To:* "Hagen, Ken" <[email protected]> > *Cc:* "[email protected]" <[email protected]> > *Sent:* Saturday, August 29, 2009 4:00:01 AM > *Subject:* Re: [OSL | CCIE_RS] redistribution from eigrp to ospf > > Ken, > > I'll give you a hint: Use ? to see what you could be missing on the > "redistribute eigrp" command under OSPF. > > On Fri, Aug 28, 2009 at 6:51 PM, Hagen, Ken <[email protected]> wrote: > >> Hello, >> Wondering if someone can help me with a redistribution problem. In this >> configuration I'm trying to redistribute from eigrp on router "Snider" on >> the router "Robinson" which connects to router "Hodges" with ospf. I cannot >> see the Snider networks on Hodges. Here are my configs. Thanks for any >> help: >> >> >> >> Hodgesf0/0----ospf----f0/0Robinsons0/0.2----eigrp----s0/0Snider >> >> >> >> >> >> Hodges#sh run >> Building configuration... >> >> >> ! >> interface Loopback0 >> ip address 192.168.3.65 255.255.255.224 >> ! >> interface Loopback1 >> ip address 192.168.3.97 255.255.255.224 >> ! >> interface Loopback2 >> ip address 192.168.1.1 255.255.255.0 >> ! >> interface FastEthernet0/0 >> ip address 192.168.3.34 255.255.255.224 >> duplex auto >> speed auto >> ! >> >> ! >> router ospf 1 >> log-adjacency-changes >> network 192.68.3.97 0.0.0.0 area 0 >> network 192.168.1.0 0.0.0.255 area 0 >> network 192.168.3.34 0.0.0.0 area 0 >> network 192.168.3.65 0.0.0.0 area 0 >> ! >> >> end >> >> >> Hodges#sh ip route >> Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP >> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area >> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 >> E1 - OSPF external type 1, E2 - OSPF external type 2 >> i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS >> level-2 >> ia - IS-IS inter area, * - candidate default, U - per-user static >> route >> o - ODR, P - periodic downloaded static route >> >> Gateway of last resort is not set >> >> C 192.168.1.0/24 is directly connected, Loopback2 >> O E2 192.168.2.0/24 [110/50] via 192.168.3.33, 00:16:19, FastEthernet0/0 >> 192.168.3.0/27 is subnetted, 3 subnets >> C 192.168.3.96 is directly connected, Loopback1 >> C 192.168.3.64 is directly connected, Loopback0 >> C 192.168.3.32 is directly connected, FastEthernet0/0 >> >> >> >> >> Robinson#sh run >> Building configuration... >> >> >> >> interface FastEthernet0/0 >> ip address 192.168.3.33 255.255.255.224 >> duplex auto >> speed auto >> ! >> interface Serial0/0 >> no ip address >> encapsulation frame-relay >> clock rate 2000000 >> ! >> interface Serial0/0.1 point-to-point >> ip address 192.168.4.5 255.255.255.252 >> no ip split-horizon >> >> frame-relay interface-dlci 102 >> ! >> interface Serial0/0.2 point-to-point >> ip address 172.16.2.21 255.255.255.252 >> no ip split-horizon >> snmp trap link-status >> frame-relay interface-dlci 103 >> ! >> interface FastEthernet0/1 >> ip address 192.168.3.129 255.255.255.224 >> duplex auto >> speed auto >> ! >> >> ! >> router eigrp 1 >> redistribute ospf 1 metric 1000 100 1 255 1500 >> redistribute eigrp 2 >> passive-interface FastEthernet0/0 >> network 192.168.3.0 >> no auto-summary >> ! >> router eigrp 2 >> redistribute eigrp 1 >> redistribute ospf 1 metric 1000 100 1 255 1500 >> network 172.16.0.0 >> network 192.168.4.0 >> no auto-summary >> ! >> router ospf 1 >> log-adjacency-changes >> summary-address 192.168.3.128 255.255.255.128 >> summary-address 172.16.0.0 255.255.0.0 >> redistribute eigrp 1 >> redistribute eigrp 2 metric 100 >> network 192.168.3.33 0.0.0.0 area 0 >> default-metric 50 >> ! >> >> end >> >> >> >> >> >> >> >> >> Snider#sh run >> Building configuration... >> >> >> interface Loopback0 >> ip address 172.16.1.1 255.255.255.0 >> ! >> interface Loopback1 >> ip address 172.16.0.1 255.255.255.255 >> ! >> >> interface Serial0/0 >> ip address 172.16.2.22 255.255.255.252 >> encapsulation frame-relay >> clock rate 2000000 >> frame-relay interface-dlci 301 >> ! >> >> ! >> interface Serial0/1 >> no ip address >> shutdown >> clock rate 2000000 >> ! >> router eigrp 2 >> network 172.16.0.0 >> no auto-summary >> >> end >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> > > > > -- > Bryan Bartik > CCIE #23707 (R&S), CCNP > Sr. Support Engineer - IPexpert, Inc. > URL: http://www.IPexpert.com > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
