Thank you. Got it working now. Ken From: Rick Mur [mailto:[email protected]] Sent: Sunday, August 30, 2009 3:43 PM To: Solomon Ayele Cc: Bryan Bartik; Hagen, Ken; [email protected] Subject: Re: [OSL | CCIE_RS] redistribution from eigrp to ospf
You are missing several things in the redistribution. First of all the 'subnets' keyword on the EIGRP->OSPF redistribution. It could not be an issue, but you will advertise classfull prefixes. Besides that IOS will warn you for this! The other thing is that you have to specify a metric when you redistribute into a distance vector protocol like RIP or EIGRP. Either by configuring a 'default metric' or by specifying this behind the redistribute command. -- Regards, Rick Mur CCIE2 #21946 (R&S / Service Provider) Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com On Sun, Aug 30, 2009 at 7:37 AM, Solomon Ayele <[email protected]<mailto:[email protected]>> wrote: hi, what is missing? should he include "subnet" or "metric" in "redistribute eigrp"? Rs Solomon ________________________________ From: Bryan Bartik <[email protected]<mailto:[email protected]>> To: "Hagen, Ken" <[email protected]<mailto:[email protected]>> Cc: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:ccie...@onlinestudylistcom>> Sent: Saturday, August 29, 2009 4:00:01 AM Subject: Re: [OSL | CCIE_RS] redistribution from eigrp to ospf Ken, I'll give you a hint: Use ? to see what you could be missing on the "redistribute eigrp" command under OSPF. On Fri, Aug 28, 2009 at 6:51 PM, Hagen, Ken <[email protected]<mailto:[email protected]>> wrote: Hello, Wondering if someone can help me with a redistribution problem. In this configuration I'm trying to redistribute from eigrp on router "Snider" on the router "Robinson" which connects to router "Hodges" with ospf. I cannot see the Snider networks on Hodges. Here are my configs. Thanks for any help: Hodgesf0/0----ospf----f0/0Robinsons0/0.2----eigrp----s0/0Snider Hodges#sh run Building configuration... ! interface Loopback0 ip address 192.168.3.65 255.255.255.224 ! interface Loopback1 ip address 192.168.3.97 255.255.255.224 ! interface Loopback2 ip address 192.168.1.1 255.255.255.0 ! interface FastEthernet0/0 ip address 192.168.3.34 255.255.255.224 duplex auto speed auto ! ! router ospf 1 log-adjacency-changes network 192.68.3.97 0.0.0.0 area 0 network 192.168.1.0 0.0.0.255 area 0 network 192.168.3.34 0.0.0.0 area 0 network 192.168.3.65 0.0.0.0 area 0 ! end Hodges#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is not set C 192.168.1.0/24<http://192.168.1.0/24> is directly connected, Loopback2 O E2 192.168.2.0/24<http://192.168.2.0/24> [110/50] via 192.168.3.33, 00:16:19, FastEthernet0/0 192.168.3.0/27<http://192.168.3.0/27> is subnetted, 3 subnets C 192.168.3.96 is directly connected, Loopback1 C 192.168.3.64 is directly connected, Loopback0 C 192.168.3.32 is directly connected, FastEthernet0/0 Robinson#sh run Building configuration... interface FastEthernet0/0 ip address 192.168.3.33 255.255.255.224 duplex auto speed auto ! interface Serial0/0 no ip address encapsulation frame-relay clock rate 2000000 ! interface Serial0/0.1 point-to-point ip address 192.168.4.5 255.255.255.252 no ip split-horizon frame-relay interface-dlci 102 ! interface Serial0/0.2 point-to-point ip address 172.16.2.21 255.255.255.252 no ip split-horizon snmp trap link-status frame-relay interface-dlci 103 ! interface FastEthernet0/1 ip address 192.168.3.129 255.255.255.224 duplex auto speed auto ! ! router eigrp 1 redistribute ospf 1 metric 1000 100 1 255 1500 redistribute eigrp 2 passive-interface FastEthernet0/0 network 192.168.3.0 no auto-summary ! router eigrp 2 redistribute eigrp 1 redistribute ospf 1 metric 1000 100 1 255 1500 network 172.16.0.0 network 192.168.4.0 no auto-summary ! router ospf 1 log-adjacency-changes summary-address 192.168.3.128 255.255.255.128 summary-address 172.16.0.0 255.255.0.0 redistribute eigrp 1 redistribute eigrp 2 metric 100 network 192.168.3.33 0.0.0.0 area 0 default-metric 50 ! end Snider#sh run Building configuration... interface Loopback0 ip address 172.16.1.1 255.255.255.0 ! interface Loopback1 ip address 172.16.0.1 255.255.255.255 ! interface Serial0/0 ip address 172.16.2.22 255.255.255.252 encapsulation frame-relay clock rate 2000000 frame-relay interface-dlci 301 ! ! interface Serial0/1 no ip address shutdown clock rate 2000000 ! router eigrp 2 network 172.16.0.0 no auto-summary end _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com> -- Bryan Bartik CCIE #23707 (R&S), CCNP Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
