I am having an issue that is just plan bugging me. I was flying along on a
lab better then I ever have and then WAM! A brick wall I original was
working on lab vol 2 sect 11 however after I hit this issue I stopped and
even similar.
Where is what I have
R2 loop1 - area 2
S0/1/0.256 - area 1
R5 loop1 - area 5
S0/1/0 - area 1
F0/0 - area 0
R6 loop1 - area 6
S0/1/0 - area 1
F0/0 - area 0
No matter what I do, I can not get the virtual-link to come up from any
router pair. I even reloaded the routers and nothing. The debug ip os
packet just shows the hellos going by and I never see anything else.
Where are the Configs and some show commands
. R5
interface Loopback1
ip address 192.168.5.5 255.255.255.255
!
interface FastEthernet0/0
ip address 172.16.200.5 255.255.255.128
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/1/0
ip address 172.16.0.5 255.255.255.248
encapsulation frame-relay
ip ospf priority 0
frame-relay map ip 172.16.0.5 502
frame-relay map ip 172.16.0.6 502 broadcast
frame-relay map ip 172.16.0.2 502 broadcast
no frame-relay inverse-arp
!
interface Serial0/2/0
no ip address
shutdown
!
router ospf 1
log-adjacency-changes
area 0 virtual-link 192.168.2.2
passive-interface Serial0/2/0
passive-interface Loopback1
network 172.16.0.0 0.0.0.7 area 1
network 172.16.200.0 0.0.0.127 area 0
network 192.168.5.5 0.0.0.0 area 5
R5#sh ip os n
Neighbor ID Pri State Dead Time Address Interface
192.168.6.6 1 FULL/DR 00:00:37 172.16.200.6
FastEthernet0/0
192.168.2.2 255 FULL/DR 00:01:42 172.16.0.2
Serial0/1/0
R5#sh ip os v
Virtual Link OSPF_VL0 to router 192.168.2.2 is down
Run as demand circuit
DoNotAge LSA allowed.
Transit area 0, Cost of using 65535
Transmit Delay is 1 sec, State DOWN,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
R2
interface Loopback1
ip address 192.168.2.2 255.255.255.255
interface Serial0/1/0
no ip address
encapsulation frame-relay
no frame-relay inverse-arp
!
interface Serial0/1/0.24 multipoint
ip address 172.16.24.2 255.255.255.252
frame-relay map ip 172.16.24.1 204 broadcast
!
interface Serial0/1/0.256 multipoint
ip address 172.16.0.2 255.255.255.248
ip ospf priority 255
frame-relay map ip 172.16.0.5 205 broadcast
frame-relay map ip 172.16.0.6 206 broadcast
frame-relay map ip 172.16.0.2 205
router ospf 1
router-id 192.168.2.2
log-adjacency-changes
area 0 virtual-link 192.168.5.5
area 0 virtual-link 192.168.6.6
passive-interface Serial0/2/0
network 172.16.0.0 0.0.0.7 area 1
network 192.168.2.2 0.0.0.0 area 2
neighbor 172.16.0.6
neighbor 172.16.0.5
R2#sh ip os v
Virtual Link OSPF_VL1 to router 192.168.5.5 is down
Run as demand circuit
DoNotAge LSA allowed.
Transit area 0, Cost of using 65535
Transmit Delay is 1 sec, State DOWN,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Virtual Link OSPF_VL0 to router 192.168.6.6 is down
Run as demand circuit
DoNotAge LSA allowed.
Transit area 0, Cost of using 65535
Transmit Delay is 1 sec, State DOWN,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
R2#sh ip os n
Neighbor ID Pri State Dead Time Address Interface
192.168.6.6 0 FULL/DROTHER 00:01:43 172.16.0.6
Serial0/1/0.256
192.168.5.5 0 FULL/DROTHER 00:01:43 172.16.0.5
Serial0/1/0.256
R6
interface Loopback1
ip address 192.168.6.6 255.255.255.255
!
interface FastEthernet0/0
ip address 172.16.200.6 255.255.255.128
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/1/0
ip address 172.16.0.6 255.255.255.248
encapsulation frame-relay
ip ospf priority 0
frame-relay map ip 172.16.0.5 602
frame-relay map ip 172.16.0.6 602
frame-relay map ip 172.16.0.2 602 broadcast
no frame-relay inverse-arp
router ospf 1
log-adjacency-changes
area 0 virtual-link 192.168.2.2
passive-interface Loopback1
network 172.16.0.0 0.0.0.7 area 1
network 172.16.200.0 0.0.0.127 area 0
network 192.168.6.6 0.0.0.0 area 6
R6#sh ip os v
Virtual Link OSPF_VL0 to router 192.168.2.2 is down
Run as demand circuit
DoNotAge LSA allowed.
Transit area 0, Cost of using 65535
Transmit Delay is 1 sec, State DOWN,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
R6#sh ip os n
Neighbor ID Pri State Dead Time Address Interface
192.168.5.5 1 FULL/BDR 00:00:34 172.16.200.5
FastEthernet0/0
192.168.2.2 255 FULL/DR 00:01:35 172.16.0.2
Serial0/1/0
Thanks in advanced
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
