Never mind..I finally figured it out. I made a very dumb mistake that I was simply not seeing. My virt link lines where all area 0 not the transit area... _____
From: [email protected] [mailto:[email protected]] On Behalf Of Rob Sent: Monday, September 07, 2009 11:03 AM To: 'CCIE OSL' Subject: [OSL | CCIE_RS] Issue With Virtual links I am having an issue that is just plan bugging me. I was flying along on a lab better then I ever have and then WAM! A brick wall I original was working on lab vol 2 sect 11 however after I hit this issue I stopped and even similar. Where is what I have R2 loop1 - area 2 S0/1/0.256 - area 1 R5 loop1 - area 5 S0/1/0 - area 1 F0/0 - area 0 R6 loop1 - area 6 S0/1/0 - area 1 F0/0 - area 0 No matter what I do, I can not get the virtual-link to come up from any router pair. I even reloaded the routers and nothing. The debug ip os packet just shows the hellos going by and I never see anything else. Where are the Configs and some show commands . R5 interface Loopback1 ip address 192.168.5.5 255.255.255.255 ! interface FastEthernet0/0 ip address 172.16.200.5 255.255.255.128 duplex auto speed auto ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/1/0 ip address 172.16.0.5 255.255.255.248 encapsulation frame-relay ip ospf priority 0 frame-relay map ip 172.16.0.5 502 frame-relay map ip 172.16.0.6 502 broadcast frame-relay map ip 172.16.0.2 502 broadcast no frame-relay inverse-arp ! interface Serial0/2/0 no ip address shutdown ! router ospf 1 log-adjacency-changes area 0 virtual-link 192.168.2.2 passive-interface Serial0/2/0 passive-interface Loopback1 network 172.16.0.0 0.0.0.7 area 1 network 172.16.200.0 0.0.0.127 area 0 network 192.168.5.5 0.0.0.0 area 5 R5#sh ip os n Neighbor ID Pri State Dead Time Address Interface 192.168.6.6 1 FULL/DR 00:00:37 172.16.200.6 FastEthernet0/0 192.168.2.2 255 FULL/DR 00:01:42 172.16.0.2 Serial0/1/0 R5#sh ip os v Virtual Link OSPF_VL0 to router 192.168.2.2 is down Run as demand circuit DoNotAge LSA allowed. Transit area 0, Cost of using 65535 Transmit Delay is 1 sec, State DOWN, Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 R2 interface Loopback1 ip address 192.168.2.2 255.255.255.255 interface Serial0/1/0 no ip address encapsulation frame-relay no frame-relay inverse-arp ! interface Serial0/1/0.24 multipoint ip address 172.16.24.2 255.255.255.252 frame-relay map ip 172.16.24.1 204 broadcast ! interface Serial0/1/0.256 multipoint ip address 172.16.0.2 255.255.255.248 ip ospf priority 255 frame-relay map ip 172.16.0.5 205 broadcast frame-relay map ip 172.16.0.6 206 broadcast frame-relay map ip 172.16.0.2 205 router ospf 1 router-id 192.168.2.2 log-adjacency-changes area 0 virtual-link 192.168.5.5 area 0 virtual-link 192.168.6.6 passive-interface Serial0/2/0 network 172.16.0.0 0.0.0.7 area 1 network 192.168.2.2 0.0.0.0 area 2 neighbor 172.16.0.6 neighbor 172.16.0.5 R2#sh ip os v Virtual Link OSPF_VL1 to router 192.168.5.5 is down Run as demand circuit DoNotAge LSA allowed. Transit area 0, Cost of using 65535 Transmit Delay is 1 sec, State DOWN, Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 Virtual Link OSPF_VL0 to router 192.168.6.6 is down Run as demand circuit DoNotAge LSA allowed. Transit area 0, Cost of using 65535 Transmit Delay is 1 sec, State DOWN, Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 R2#sh ip os n Neighbor ID Pri State Dead Time Address Interface 192.168.6.6 0 FULL/DROTHER 00:01:43 172.16.0.6 Serial0/1/0.256 192.168.5.5 0 FULL/DROTHER 00:01:43 172.16.0.5 Serial0/1/0.256 R6 interface Loopback1 ip address 192.168.6.6 255.255.255.255 ! interface FastEthernet0/0 ip address 172.16.200.6 255.255.255.128 duplex auto speed auto ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/1/0 ip address 172.16.0.6 255.255.255.248 encapsulation frame-relay ip ospf priority 0 frame-relay map ip 172.16.0.5 602 frame-relay map ip 172.16.0.6 602 frame-relay map ip 172.16.0.2 602 broadcast no frame-relay inverse-arp router ospf 1 log-adjacency-changes area 0 virtual-link 192.168.2.2 passive-interface Loopback1 network 172.16.0.0 0.0.0.7 area 1 network 172.16.200.0 0.0.0.127 area 0 network 192.168.6.6 0.0.0.0 area 6 R6#sh ip os v Virtual Link OSPF_VL0 to router 192.168.2.2 is down Run as demand circuit DoNotAge LSA allowed. Transit area 0, Cost of using 65535 Transmit Delay is 1 sec, State DOWN, Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 R6#sh ip os n Neighbor ID Pri State Dead Time Address Interface 192.168.5.5 1 FULL/BDR 00:00:34 172.16.200.5 FastEthernet0/0 192.168.2.2 255 FULL/DR 00:01:35 172.16.0.2 Serial0/1/0 Thanks in advanced No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.71/2334 - Release Date: 09/07/09 06:40:00
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
