I havent tried this but I can see you are sending extended communities one way but not the other.
That would be the first thing I'd check. Cheers, Matt CCIE #22386 CCSI #31207 2009/11/14 K Ploited <[email protected]>: > Dear Experts, > > Could you please assist me with this ? I am expericing the error when doing > MPLS task 28.3: > > R5 > == > > IOS: System image file is "flash:c2800nm-adventerprisek9-mz.124-24.T1.bin" > > R5#show log > > *Mar 29 13:47:09.639: %BGP-3-NOTIFICATION: received from neighbor 200.0.0.2 > 2/7 (unsupported/disjoint capability) 0 bytes > *Mar 29 13:47:13.011: %BGP-3-NOTIFICATION: sent to neighbor 200.0.0.2 2/7 > (unsupported/disjoint capability) 0 bytes FFFF FFFF FFFF FFFF FFFF FFFF > FFFF FFFF 0035 0104 0064 00B4 C800 0002 1802 0601 0400 0100 8002 0280 0002 > 0202 0002 0641 0400 0000 64 > *Mar 29 13:47:15.747: %BGP-3-NOTIFICATION: received from neighbor 200.0.0.2 > 2/7 (unsupported/disjoint capability) 0 bytes > *Mar 29 13:47:17.795: %BGP-3-NOTIFICATION: received from neighbor 200.0.0.2 > 2/7 (unsupported/disjoint capability) 0 bytes > *Mar 29 13:47:19.843: %BGP-3-NOTIFICATION: received from neighbor 200.0.0.2 > 2/7 (unsupported/disjoint capability) 0 bytes > *Mar 29 13:47:23.939: %BGP-3-NOTIFICATION: received from neighbor 200.0.0.2 > 2/7 (unsupported/disjoint capability) 0 bytes > *Mar 29 13:47:25.987: %BGP-3-NOTIFICATION: received from neighbor 200.0.0.2 > 2/7 (unsupported/disjoint capability) 0 bytes > *Mar 29 13:47:29.059: %BGP-3-NOTIFICATION: received from neighbor 200.0.0.2 > 2/7 (unsupported/disjoint capability) 0 bytes > *Mar 29 13:47:29.395: %BGP-3-NOTIFICATION: sent to neighbor 200.0.0.2 2/7 > (unsupported/disjoint capability) 0 bytes FFFF FFFF FFFF FFFF FFFF FFFF > FFFF FFFF 0035 0104 0064 00B4 C800 0002 1802 0601 0400 0100 8002 0280 0002 > 0202 0002 0641 0400 0000 64 > > R5#sh run | sec bgp > router bgp 100 > no bgp default ipv4-unicast > bgp log-neighbor-changes > neighbor 200.0.0.2 remote-as 100 > neighbor 200.0.0.2 update-source Loopback0 > ! > address-family ipv4 > neighbor 200.0.0.2 activate > no auto-summary > no synchronization > exit-address-family > > R2 > == > > IOS: System image file is "flash:c2800nm-adventerprisek9-mz.124-24.T1.bin > > R2#show log > > *Nov 14 05:57:03.579: %BGP-3-NOTIFICATION: received from neighbor 200.0.0.5 > 2/7 (unsupported/disjoint capability) 0 bytes > *Nov 14 05:57:04.271: %SYS-5-CONFIG_I: Configured from console by console > *Nov 14 05:57:06.287: %BGP-3-NOTIFICATION: sent to neighbor 200.0.0.5 2/7 > (unsupported/disjoint capability) 0 bytes FFFF FFFF FFFF FFFF FFFF FFFF > FFFF FFFF 0035 0104 0064 00B4 C800 0005 1802 0601 0400 0100 0102 0280 0002 > 0202 0002 0641 0400 0000 64 > *Nov 14 05:57:06.651: %BGP-3-NOTIFICATION: received from neighbor 200.0.0.5 > 2/7 (unsupported/disjoint capability) 0 bytes > *Nov 14 05:57:08.699: %BGP-3-NOTIFICATION: received from neighbor 200.0.0.5 > 2/7 (unsupported/disjoint capability) 0 bytes > *Nov 14 05:57:11.407: %BGP-3-NOTIFICATION: sent to neighbor 200.0.0.5 2/7 > (unsupported/disjoint capability) 0 bytes FFFF FFFF FFFF FFFF FFFF FFFF > FFFF FFFF 0035 0104 0064 00B4 C800 0005 1802 0601 0400 0100 0102 0280 0002 > 0202 0002 0641 0400 0000 64 > *Nov 14 05:57:12.803: %BGP-3-NOTIFICATION: received from neighbor 200.0.0.5 > 2/7 (unsupported/disjoint capability) 0 bytes > *Nov 14 05:57:13.455: %BGP-3-NOTIFICATION: sent to neighbor 200.0.0.5 2/7 > (unsupported/disjoint capability) 0 bytes FFFF FFFF FFFF FFFF FFFF FFFF > FFFF FFFF 0035 0104 0064 00B4 C800 0005 1802 0601 0400 0100 0102 0280 0002 > 0202 0002 0641 0400 0000 64 > *Nov 14 05:57:17.915: %BGP-3-NOTIFICATION: received from neighbor 200.0.0.5 > 2/7 (unsupported/disjoint capability) 0 bytes > *Nov 14 05:57:20.623: %BGP-3-NOTIFICATION: sent to neighbor 200.0.0.5 2/7 > (unsupported/disjoint capability) 0 bytes FFFF FFFF FFFF FFFF FFFF FFFF > FFFF FFFF 0035 0104 0064 00B4 C800 0005 1802 0601 0400 0100 0102 0280 0002 > 0202 0002 0641 0400 0000 64 > > R2#sh run | sec bgp > router bgp 100 > no bgp default ipv4-unicast > bgp log-neighbor-changes > neighbor 200.0.0.5 remote-as 100 > neighbor 200.0.0.5 update-source Loopback0 > ! > address-family vpnv4 > neighbor 200.0.0.5 activate > neighbor 200.0.0.5 send-community extended > exit-address-family > > > I also attached my full configuration. Thanks. > > > Best Regards, > K Ploited > > > ________________________________ > View photos of singles in your area! Looking for a date? > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
