Dear Marko,
Thank you very much.
If you don't mind to tell me about "send-community extended". This seems to
appear automatically. What I mean is when I, for example, type "nei 200.0.0.2
act". It automatically inserts.
Also, Thanks to Matt for your comment ;).
Best Regards,
K Ploited
> From: [email protected]
> Date: Sat, 14 Nov 2009 09:52:04 +0000
> To: [email protected]
> Subject: Re: [OSL | CCIE_RS] Vol 1 Lab 28 Task 3
>
> See below the lines I marked for you. Can you spot the difference? :-)
>
> >> R5#sh run | sec bgp
> >> router bgp 100
> >> no bgp default ipv4-unicast
> >> bgp log-neighbor-changes
> >> neighbor 200.0.0.2 remote-as 100
> >> neighbor 200.0.0.2 update-source Loopback0
> >> !
> >> address-family ipv4 <<<--------------------------------------------------
> >> neighbor 200.0.0.2 activate
> >> no auto-summary
> >> no synchronization
> >> exit-address-family
> >>
> >> R2#sh run | sec bgp
> >> router bgp 100
> >> no bgp default ipv4-unicast
> >> bgp log-neighbor-changes
> >> neighbor 200.0.0.5 remote-as 100
> >> neighbor 200.0.0.5 update-source Loopback0
> >> !
> >> address-family vpnv4 <<<--------------------------------------------------
> >> neighbor 200.0.0.5 activate
> >> neighbor 200.0.0.5 send-community extended
> >> exit-address-family
>
> --
> Marko Milivojevic - CCIE #18427
> Senior Technical Instructor - IPexpert
>
> Mailto: [email protected]
> Telephone: +1.810.326.1444
> Live Assistance, Please visit: http://www.ipexpert.com/chat
> eFax: +1.810.454.0130
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
_________________________________________________________________
Looking to move this spring? With all the lastest places, searching has never
been easier. Look now!
http://clk.atdmt.com/NMN/go/157631292/direct/01/_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
