Team,

OK, I know I am taking a risk here...voicing my frustration...but am giving up 
for today...I can not figure it out why R6 after receiving routes from OSPF 
domain, does not pass these routes on to EIGRP domain. Below is a snapshot of 
the config (including redistribution) but for now I would like to mention that, 
in my troubleshooting process I have verified the following (typical steps when 
troubleshooting issues with EIGRP route advertisements):
-----------------------------------------------------------------------------------------------------------------------
On R6 I checked:
 
1- Neighborship with R9 and Cat3 => check.
2- DLs blocking updates => check [N/A=not applicable]
3- "no auto-summary" =>check
4- split-horison issues => N/A
5- Did "Debug ip eigrp" but could not see any messages from R6. On R9 and Cat3 
doing "sh ip route <any route from OSPF domain>, the result was the expected 
message:" %not in the table"
-------------------------------------------------------------------------------------------------------------------------
R6 config snapshot:

router eigrp 130
 redistribute ospf 1 metric 1000 1000 255 1 1500
 network 150.20.66.0 0.0.0.255
 network 150.20.69.0 0.0.0.255
 no auto-summary
!
router ospf 1
 router-id 150.10.6.6
 log-adjacency-changes
 area 30 virtual-link 150.10.7.7 message-digest-key 1 md5 cisco
 redistribute eigrp 130 subnets
!
 
Note: R6 can see and reach any OSPF routes...the problem is with R9, Cat3, Cat4 
(sitting behing R6). They do not receive any eigrp advertisements, regarding 
OSPF routes from R6. After redistribution, this should happen immediately. I am 
not including configs of R9 or Cat3 [to save space] since neighborship with R6 
is OK.

Any thoughts?

Bauke
 
 


      __________________________________________________________________
Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your 
favourite sites. Download it now
http://ca.toolbar.yahoo.com.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to