You don't have a metric for your redistribution into OSPF. But I don't think thats it...
Cheers, Matt CCIE #22386 CCSI #31207 2009/12/27 Bauke Dzavhale <[email protected]> > Team, > > OK, I know I am taking a risk here...voicing my frustration...but am giving > up for today...I can not figure it out why R6 after receiving routes from > OSPF domain, does not pass these routes on to EIGRP domain. Below is a > snapshot of the config (including redistribution) but for now I would like > to mention that, in my troubleshooting process I have verified the following > (typical steps when troubleshooting issues with EIGRP route advertisements): > > ----------------------------------------------------------------------------------------------------------------------- > On R6 I checked: > > 1- Neighborship with R9 and Cat3 => *check.* > 2- DLs blocking updates => *check* [*N/A=*not applicable] > 3- "no auto-summary" =>*check* > 4- split-horison issues =>* N/A* > 5- Did "Debug ip eigrp" but could not see any messages from R6. On R9 and > Cat3 doing "sh ip route <*any route from OSPF domain>,* the result was the > expected message:" %not in the table" > > ------------------------------------------------------------------------------------------------------------------------- > R6 config snapshot: > > router eigrp 130 > *redistribute ospf 1 metric 1000 1000 255 1 1500 > * network 150.20.66.0 0.0.0.255 > network 150.20.69.0 0.0.0.255 > *no auto-summary > *! > router ospf 1 > router-id 150.10.6.6 > log-adjacency-changes > area 30 virtual-link 150.10.7.7 message-digest-key 1 md5 cisco > * redistribute eigrp 130 subnets > *! > > Note: R6 can see and reach any OSPF routes...the problem is with R9, Cat3, > Cat4 (sitting behing R6). They do not receive any eigrp advertisements, > regarding OSPF routes from R6. After redistribution, this should happen > immediately. I am not including configs of R9 or Cat3 [to save space] since > neighborship with R6 is OK. > > Any thoughts? > Bauke > > > > ------------------------------ > > *Yahoo! Canada Toolbar :* Search from anywhere on the web and bookmark > your favourite sites. Download it now! <http://ca.toolbar.yahoo.com/> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
